fits  Universal for OEM Dyna, XL Sportster, FXR riser mounted gauges

Allows you to relocate and mount an OEM Harley gauge bezel straight to any Kraus Gauge Mounting System. Enables you to make fine-tune adjustments, pivoting your gauges perfectly from your point of view. This will work for OEM Dyna, Sportster, and FXR riser-mounted gauge mounts.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Speedo, Instruments & Dash > Multifunctional Instruments & Instrument Sets > Kraus, Adjustable H-D Gauge Mount. Black

fits  S&S HVHP pump: 84-99 Big Twin, 96-06 TC (Excl. 2006 Dyna). Camshaft support plate: 17-24 M8. Ball, between inner & outer clutch ramp (3 used): 87-24 Big Twin (Excl. hydraulic actuated clutch models); 94-22 XL Sportster; 08-12 XR1200 Oil pump: among others 2011 Softail. Oil pump (as 8873): among others 2013 FLT/Touring. Oil pump, check ball: 37-99 Big Twin; 52-76 K, XL Sportster

3/8″ diameter steel balls. Various applications. OEM replacement reference 8886 and 8873.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Oil Pumps > Athena, oil pump check valve/clutch balls

fits  14-22 XL Sportster (NU)

OEM style reproduction. Black

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Brakes > Master Cylinders & Parts > Foot Master Cylinder > Master Cylinders > Rear master cylinder, XL Sportster

fits  52-81 K, XL Sportster, Sportster (NU)

Zinc plated. Reproduction of OEM 61135-52A fuel tank spacers.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gas Tanks & Accessories > Gas Tanks > Mounting Hardware > Colony, gas tank spacer set (4) zinc

fits  49-64 FL: oil filter oil line 54-E61 KH, XL Sportster, XLH (NU) : return lines motor oil

Reproduction of the OEM 63527-50 nut, zinc plated, and 63529-50 rubber oil line sleeve. Used in the oil filter lines of Big Twin models and in the motor oil return lines of KH and Sportsters.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Oil Tanks & Filters > Oil Lines > Oil Line Hardware > Colony, oil line sleeve and nut kit

fits  54-64 FL, FLH, XL Sportster, XLH with 69000-54 jubilee bugle / trumpet horn (NU)

Reproduction of the OEM 69013-54 laminated rubber bracket as used on the 69000-54 Jubilee bugle / trumpet horn, which was introduced in 1954. OEM replacement reference 69013-54.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Horns > Mounting > Colony, horn power pack rubber mount bracket

fits  91-98 FXD; 84-94 FXR; 84-85 FX, XL Sportster

Chrome plated 40-spoke replacement spoke wheel, laced and trued. Seals are installed, bearing spacing is pre-set and wheel is ready for installation. Wider than stock wheels are for wide tire applications. An OEM fitment may not be applicable due to OEM width restrictions in fender, belt, etc. Note: For all wire wheels it is advised to check spoke tension before installing the tire. After approx. 250km the spoke tension must be checked again to insure a correct spoke tension. After each 5000km, or as part of regular maintenance, a spoke-check is advised to insure spoke tension is still correct.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Wheels > 2.50 x 19 front wheel 40 spokes chrome

fits  84-85 FXST; 82-86 FXWG, FXSB, FXE; 82-85 FXR, XL Sportster

Chrome plated 40-spoke replacement spoke wheel, laced and trued. Seals are installed, bearing spacing is pre-set and wheel is ready for installation. Wider than stock wheels are for wide tire applications. An OEM fitment may not be applicable due to OEM width restrictions in fender, belt, etc. Note: For all wire wheels it is advised to check spoke tension before installing the tire. After approx. 250km the spoke tension must be checked again to insure a correct spoke tension. After each 5000km, or as part of regular maintenance, a spoke-check is advised to insure spoke tension is still correct.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Wheels > 3.00 x 16 rear wheel 40 spokes chrome

fits  Universal; 02-up many Softail, Dyna, XL Sportster

Used for a perfect finish when replacing OEM fender strut mounted turn signals with Kellermann, or any other aftermarket turn signal, with M8 mounting studs; Note: Kellermann Atto, Micro S and Rhombus S turn signals require 563156 (20mm OAL) or 563157 (40mm OAL) M8 to M5 adapter studs

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Fenders > Fender Adapters, Mounts & Struts > Kuryakyn, Fender strut cover plates chrome

fits  Universal; 02-up many Softail, Dyna, XL Sportster

Used for a perfect finish when replacing OEM fender strut mounted turn signals with Kellermann, or any other aftermarket turn signal, with M8 mounting studs; Note: Kellermann Atto, Micro S and Rhombus S turn signals require 563156 (20mm OAL) or 563157 (40mm OAL) M8 to M5 adapter studs

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Fenders > Fender Adapters, Mounts & Struts > Kuryakyn, Fender strut cover plates gloss black