fits  Universal

With EU wall plug. Professional variable 0.4A to 10A 12V diagnostic battery charger-tester & power supply for powersport & small craft / machine professionals, repair shops and battery retailers. – Pro use: 12V lead-acid STD & AGM from 3-50Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah. – Normal use: 12V lead-acid STD & AGM from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-120Ah. – Charging Amps: 0.4A to 10A variable (Ampmatic) – Charging Volts: 12V lead-acid: 0.5V to 22V. 12.8V/13.2V Lithium LFP (LiFePO4): 0.5V to 14.4V. Powersupply: 11V to 13.6V. – Operation: selectable – 11 step charger – 3 Selections: Select a charge mode for 12V lead-acid OR 12.8V LiFePO4, or select PowerSupply mode for battery support during vehicle diagnostics, tuning or troubleshooting – Automatic fast battery activation: flashing green test light indicates battery is healthy and sufficiently charged – Smart recovery mode for deep discharged batteries, a bad battery is quickly identified, a good battery receives charge is retested after – Pushbutton activated BMS reset for LiFePO4 batteries – Test indication for GOOD (80 to 100%), OK (60 to 80%) and BAD (below 60%) batteries – Powersupply mode provides constant power for vehicle tuning, diagnostics and troubleshooting – Case with rubber bumbers, with wall-mount or hanger bars. AC Class 2 input socket, with ON/OFF switch, 15cm / 6″ output cord – Certification – CE, UKCA, NRTL (UL & CSA), PSE (Japan), SAA (Aus & NZ) – Indoor use. IP40 rating – Included cables: Class II AC cord suitable for region, O-43 charge lead extender 180cm/72″ and O-14 fused battery clips – Vehicle hanging hook and wall receiver included

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Pro 1 DUO 12B 10A battery charger

fits  Universal

With EU wall plug. 10-step 12.8V/13.2V 6A battery saving charger-tester-maintainer. The ultimate LiFePO4 / LPF Lithium Iron Phosphate) professional level battery diagnostic & maintenance charger and tester for batteries from 3 to 72 Amp-hour. – 10 steps: 1 low volt start (0.5V); 2 Test before charge; 3 Temperature check; 4 Ultra low volt save; 5 cell monitoring; 6 Test cell damage; 7 cel-balancing charge; 8 Optimize; 9 Test after charge; 10 24-7 maintenance – Starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented – Indoor / Outdoor (lowest temperature: -40°F / -40°C) – Input 100-240V 50-60Hz, high efficiency (CEC listed) – Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector – Low Volt Start of 0.5V + 3 step low volt save & test – Includes weatherproof battery lead & battery clip set – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Lithium 4S 6A battery charger

fits  Universal

With EU wall plug. 4-bank x 8-step 12.8/13.2V 0.8A Battery saving charger-tester-maintainer. Charges up to 4 x LiFePO4 / LFP (Lithium Iron Phosphate) 4-series batteries with nominal voltage of 12.8V – 13.2V. Each bank charges independently. – Saves low voltage LiFePO4 batteries – Specialized LiFePO4 charge cycle – Maintains & protects LiFePO4 batteries – Battery BMS (Battery Management System) reset – Charging Amps: 0.8A per bank – Indoor & Outdoor invironment (lowest temperature: -4°F / -20°C) – Save: Low Volt Start of 0.5V + 3 step low volt save & test – For LiFePO4 (LFP) 4 series cell 12.8 / 13.2V batteries from 2 – 30Ah – Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed – Weatherproof case with wall mounts – Incl. 6ft / 180cm AC supply lead and 4 x 6ft / 180cm charge lead ending in SAE connector. 4 x Weatherproof battery lead & 4 x standard battery clip set included – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Lithium 4s 0.8A 4-bank

fits  Universal

With EU wall plug. 6-step 12V battery to 12V battery charger. Used to charge your trailered motorcycle, ATV or speedboat from another battery. Will work with 12V (lead acid) or 12.8-13.2V (LFP-Lithium) batteries. – 2A charging Amps – For Indoor & Outdoor (lowest temperature: -4°F / -20°C) – Saves deep discharged, sulfated batteries – Low Volt Start from 2V – For STD, AGM & GEL 12V batteries and LFP 12.8V-13.2V batteries from 3 – 96Ah. – Input: 12-16 V, 2.7A max – Long term maintenance mode protects the source battery, drawing only when the battery under charge needs it. Charging will stop when source battery voltage is below 12.2V. – Weatherproof case with wall mounts – Incl. 6ft / 180cm DC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead, standard battery clip set & fused battery clip set included – No risk of overcharging – Sparks suppressed – Safe for long-term battery maintenance – Safe for vehicle electronics – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, DC to DC battery charger

fits  Universal

With EU wall plug. 4-step 6V/12V ChargeMatic Battery charger-maintainer. Will charge any 6V or 12V lead-acid battery, both starter and deep cycle. Temperature protected charger with IUoU 4-step charging program, including reversion from ‘maintenance’ float stage if high current is drawn during storage charging. Simply select 6 or 12 voltage, hook up the battery and this temperature compensated, 4-step charger will do the rest. – Charging Amps: 1.2A (temperature protected) – 4-step. Bulk, Absorption, maintain & revert – Indoor (lowest temperature: -4°F / -20°C) – Low Volt Start of 2V for 6 or 12V batteries – For 6V & 12V Lead Acid, AGM, GEL lead-acid batteries, starter and deep cycle, up to 50Ah – EU 220-240V 50-60Hz North America: 110-120V 50-60Hz. – Standard case (vented) – Incl. 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector, a fused battery lead & standard battery clip set – No risk of overcharging – Sparks suppressed – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, AccuMate 6/12 1.2A battery charger

fits  Universal

With EU wall plug. The power sport OEM recommended load tester, power desulphator and charger for all types of 12V lead-acid batteries. The BatteryMate has been saving batteries for 25 years! – New battery activation – 30 minute activation charge for new batteries that have received acid just prior to charging, such as STD flooded batteries with removable filler caps and AGM-MF ‘dry-charged’ batteries that are delivered with a separate custom acid pack – True load tester selectable from 15A to 150A – Automatically tests battery cranking amps up to 330CCA. 3 second test simulates normal engine cranking / start, 15 second test checks battery health – Powersport specific charging algorithm – 4 step charging method recovers any 12V battery. MF mode allows up to 16.9V for ‘dry-charged’ AGM batteries – Temperature regulated charging – Charge voltage is adjusted according to ambient temperature. (-4mV/°C/cell above/below 68°F/20°C) – Accurate voltage sensing. Charge leads have integrated voltage sense wires for exact voltage measurement at the battery – Easy to use. 6 position combination selector allows selection of correct test and charge current for connected battery. TEST and then select max. charge time according to result, press ‘charge’ button. Program completes charging automatically and then tests the battery – Charging Amps: 9A maximum; 1, 2, 3, 5, 7, 9 Amp selection – Testing Amps: 150A maximum; 15, 35, 50, 70, 100, 150 Amp selection – Indoor / workshop environment (lowest temperature: -4°F / -20°C) – Save: Low Volt Start of 1V + high power desulphation recovery – For Lead Acid, AGM & GEL 12V batteries from 2 – 40Ah – Selectable 110-120VAC / 220-240VAC 50-60Hz – On/Off power switch and replaceable fuse protection – Vented industrial table top case – Incl. 6ft / 180cm AC supply lead and 1 pair high current 6ft / 180cm charge leads ending in heavy duty battery clamps – No risk of overcharging – Sparks suppressed – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, BatteryMate 150/9 battery charger

fits  Universal

With EU wall plug. Professional 4-bank battery saving charger for power sport & small engine 12V batteries. No further battery knowledge required. Connect up to 4 x 12V batteries and let the charger do the rest. – OEM recommended battery care center for correct activation of new batteries and recovery, charge and testing of neglected sulphated / low-voltage batteries. – New mode: a 1 hour activation charge only for new batteries that have received acid just prior to charging, such as STD flooded batteries with removable filler caps and AGM-MF ‘dry-charged’ batteries that are delivered with a separate custom acid pack – Charging Amps: 4A maximum, Ampmatic control. (2A max. when 2A is selected) – Use: Indoor / workshop environment (lowest temperature: -4°F / -20°C) – Save: Low Volt Start of 1.8V + 2 step desulphation recovery – For Lead Acid, AGM & GEL 12V batteries from 2 – 40Ah – Selectable 110-120V / 220-240V 50-60Hz – Vented industrial table top case. – Incl. 6ft / 180cm AC supply lead and 4 x 6ft / 180cm charge lead ending in SAE connector. 4 x standard battery clip sets – No risk of overcharging – Sparks suppressed – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Pro 4 battery charger. 12V

fits  Universal

With EU wall plug. Professional 8-bank battery saving charger for power sport & small engine 12V & 6V batteries, including neglected sulphated / low-voltage batteries. Once voltage selection has been made, no further battery knowledge required. Connect up to 8 x 6V and 12V batteries and let the charger do the rest. – The OEM recommended 8-bank battery care center for recovery, charging and testing of all 6V and 12V batteries, including neglected sulphated / low-voltage batteries – 8-bank charger, each bank operates independently – Select battery voltage of 6V or 12V for each bank – 1Ah charging Amps per bank – Use: Indoor / workshop environment (lowest temperature: -4°F / -20°C) – Save: Low Volt Start of 1.8V + 2 step desulphation recovery – For Lead Acid, AGM & GEL 12V batteries from 2Ah – Selectable 110-120V / 220-240V 50-60Hz – On/Off power switch and replaceable fuse protection – Vented industrial table top case. – Incl. 6ft / 180cm AC supply lead and 8 x 6ft / 180cm charge lead ending in SAE connector. 8 x standard battery clip – No risk of overcharging – Sparks suppressed – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected – Use: Indoor / workshop environment (lowest temperature: -4°F / -20°C)

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Pro 8 battery charger. 12V/6V

fits  Universal

‘State of Charge’ battery tester. For all 12V lead-acid & 12.8V/13.2V lithium batteries. Used to quickly see the battery’s charge condition before a battery is sold, or when it is returned. – State of charge result in Volts and %, 3 different bands for Lead Acid, AGM/GEL and LiFePO4 4 series batteries – Easy to follow instructions on rear panel of the tester – Easily connects with connect clips to the battery or to an installed SAE 2-pin battery lead. – Industry standard SAE 2-pin connector – 100cm battery clip set – Flashing indicator for discharged battery

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > General Tools > Electrical > Battery Testers > Tecmate OptiMATE, Test TS126 battery tester

fits  Universal

‘Cranking & Alternator’ tester. 12V professional pocket tester for on-vehicle battery cranking performance & alternator charge voltage testing. – Checks battery charge level – Start engine. OptiMate TEST records and indicates (for 20 sec) the lowest start volts – With engine running, verify charging voltage from alternator and voltage regulator. – Microprocessor accuracy – Easy to follow instructions on rear panel of the tester – Easily connects with connect clips to the battery or to an installed SAE 2-pin battery lead. – Industry standard SAE 2-pin connector – 100cm battery clip set – Fully sealed

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > General Tools > Electrical > Battery Testers > Tecmate OptiMATE, Test TS120 battery tester