fits  Universal

Universal ON-OFF switch, complete with relay. Will switch anything that needs to be switched, like handlebar heaters, fog lights etc. Perfect solution for a prominently shown, or hidden, custom switch on just about any custom or stock bike. Complete with aluminum mount bracket and rear cover. Complete with pre-installed wiring. – Cable length approximately 1m long x 4.9mm OD – Mount hole is 6.5mm for 6mm or 1/4″ bolts – IP67 water/dust proof rating. Note: Late model H-D with CAN-bus wiring, like 11-up Softail; 12-17 Dyna; 14-up Touring; 14-22 XL Sportster, will additionally require OEM 72673-11 electrical Y-harness connection kit which plugs into the data port (OBD / On Board Diagnostics plug) to provide a 12 volt lead.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Riverside, handlebar ON-OFF switch kit

fits  84-99 FXST; 80-86 FXWG; 91-92 Dyna; 18-24 Softail and custom applications with 5/16-24 threaded shift rods

Polished stainless steel shift linkage end / ball joint / heim joint. 5/16-24 threaded with a 5/16″ (8mm) mount hole. The finishing touch to a stylish shifter rod set-up. OEM replacement reference 33871-85B.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Transmission > Shifter Rods > Riverside, shifter rod end. Stainless

fits  74-22 H-D with single or dual throttle cables (Excl. Street) (NU)

Black anodized billet aluminum with chrome plated end caps.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Knurled billet aluminum grips. Black

fits  96-22 H-D with dual throttle cables (Excl. Street) (NU)

Chrome. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Bakelite® retro handlebar grip set. Chrome

fits  96-22 H-D with dual throttle cables (Excl. Street) (NU)

Black anodized. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Bakelite® retro handlebar grip set. Black

fits  1″ handlebars equipped with a custom internal throttle system

Chrome. Designed for use with custom internal throttle grips. Both grips have an internal diameter of 1″. These grips are made from billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Bakelite® retro handlebar grip set. Int. throttle

fits  Universal (excl. e-throttle models)

Heating units, 50W (approx. 4 Amp@12 Volt) for use inside handlebars. No special grips required, nothing to see on the outside. Fits bars with a inner diameter of 22mm and secures with a set-screw. The heating elements can be machined down, if required, to a minimum of 18mm. Note 1: Will not fit e-throttle models. Note 2: When you decide to glue the heating elements inside the handlebar, make sure a special heat resistant glue is used.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Heated Grips > Riverside, grip heaters

fits  80-24 H-D with rider floorboards

Mounts to OEM floorboards of all 80-up Harley models equipped with rider floorboards. Perfect to stretch your legs on long hauls, without having to stop. Note: Installation will require modifications to the floorboard.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Footpegs & Forward Control > Floorboards > Floorboard Extension Parts > Riverside, footrest kit for rider floorboards

fits  80-98 (NU) FLT/Touring; 86-11 Softail (Excl. 97-99 FLSTS)

12mm rod, 5/16 mount holes, cen-cen adj. from approx. 30.2cm to 32cm

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Transmission > Shifter Rods > Riverside, shifter rod, stainless steel