fits  36-65 OHV models (Excl. 45″ & K, KH, 74/80″ Flathead models) (NU)

For M-5, 25, 35, 35T, 36, 45, 45A, 61, 74, 74B, 75 Linkert carburetors. OEM replacement reference 27391-36 / 1276-36.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Intake > Fuel Injection & Carburetors > Carburetors > Gaskets & O-Rings > Athena, Linkert carburetor float bowl gasket

fits  52-56 K, KH model Flatheads (NU)

2-3/4″ bore (45″ / 750cc models) and 3″ bore (55″ / 900cc models). No head gaskets, like OEM. With 0.5mm (.020″) reinforced fiber cylinder base gaskets. Complete with all gaskets, O-rings, seals and primary gaskets required for a complete engine overhaul. Complete as shown, OEM replacement reference 17026-52. Note: Does not include head gaskets since K-models were never factory equipped with head gaskets. Originally cylinders & heads are bolted together without the use of any sort of head gasket. As such head gaskets are not offered by Athena. Note: Some spray paint the ‘gasket’ surface as an additional sealant. This is not a Factory solution and it is not advised, do so at your own risk.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Engine > Athena, motor gasket & seal kit. K, KH

fits  70-99 Big Twin (Excl. Twin Cam); 56-E62 K, KH, XL Sportster; 72-22 XL Sportster (Excl. XR1200) (NU)

Fits oil pump drive shaft at drive gear side (inner). OEM replacement reference 11002.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Oil Pumps > Athena, retaining ring oil pump drive shaft

fits  52-56 K, KH models; 57-03 XL Sportster (NU)

Steel painted motor stand, designed to provides excellent stability when working on the engine.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine & Transmission Stands > Engine stand K, KH, XL models

fits  36-99 Big Twin (Excl. Twin Cam); 52-22 K, KH, XL Sportster; 08-12 XR1200; 87-10 Buell XB (NU)

Used to remove and install the wrist pin into the connecting rod in a controllable process. With slide hammer action. No need to use uncontrollable force.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Top End > MCS, wristpin tool

fits  Brake rod rear: 37-57 Big Twin; 52-74 K, KH, XL SportsterH, XL SportsterHC; 35-52 W, WL. (NU)

1/4″ diameter. Zinc plated reproduction of the 42269-30 pin, 510 cotter pin and the 1/4″ 6220W flat washer. Used on the rear 42252-52 and 42253-67 brake rods of Sportster and K models.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Fasteners > Other Fasteners > Cotter Pins > Colony, brake rod clevis pin kit. Zinc

fits  brake: 71-72 Big Twin; 52-72 K, KH, XL Sportster, XL SportsterH, XL SportsterCH (NU) throttle: 67-72, 1974 FL, FLH, FX (NU)

Parkerized. OEM replacement reference 45218-55

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Cables > Cable Mounts & Accessories > Colony brake & throttle cable clamp

fits  52-78 K, KH, XL Sportster (NU)

Zinc plated. Hex head. OEM style reproduction bolt & nut set. OEM replacement reference 3970B and 7725

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Brakes > Brake Drums > Mounting Hardware > Colony, rear brake drum mount kit. Zinc

fits  50-71 FL; 71-72 FX; 52-72 K, KH, XL Sportster (NU)

OEM style reproduction. Fits front wheel brake cable tube. OEM replacement reference 45159-50

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Cables > Cable Mounts & Accessories > Colony, front brake cable adjuster. Zinc

fits  50-71 FL/FLH; 71-72 FX; 52-72 K, KH, XL Sportster (NU)

Oem style reproduction. Used on the brake end of the brake cable. Stock replacement but also usable in custom front or rear applications. Repl. 45175-49 clevis and 45216-49 clamp.

Δείτε περισσότερα στον κατάλογο V-Twin; Street

Home > Parts > Handlebars & Hand Controls > Cables > Cable Mounts & Accessories > Barnett, brake cable clamp. Zinc