fits  Universal 5-9V

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems. – Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light – Compatible with classic bikes, new models and modern operating systems – Correct flashing frequency – No error messages in the cockpit – No disruptive quiescent currents – Installation of indicators with higher power consumption [watts] than original – Installation of indicators with lower power consumption [watts] than original – Installation of indicators with higher voltage [Volt] than original – Installation on motorcycles with minus-switched indicators – Installation on motorcycles with current-controlled indicators

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Kellerman, i.Nex Equalizer.8V

fits  18-24 Softail

1.5W, 1 LED. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Kellermann, ‘Dash A’ turn signal. Left front

fits  18-24 Softail

1.5W, 1 LED. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Kellermann, ‘Dash A’ turn signal. Right front

fits  18-24 Softail

2.5W, 3 LEDs. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Kellermann, ‘Dash M’ turn signal. Left front

fits  18-24 Softail

2.5W, 3 LEDs. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Kellermann, ‘Dash M’ turn signal. Right front

fits  Universal

Dual function. Turn signal with position light / running light function with a clear lens. ECE approved for front use. With sequential lighting turn signals (one lighting after the other, in a ‘wave-like’ pulsating motion). The lens is clear and the unit is equipped with 16 extremely bright high-power LED technology. The one of a kind slim and sleek design is inspired on a wing with an integrated jet-engine. – Highest light output – Kellermann HighPower LED Technology – state-of-the-art “IC” chip technology – 32 MHz real-time microprocessor control – Silent current, advanced power saving algorithm – High level of visibility over a wide range of angles – Longlife Protection Guard® – Suitable for 12 volt DC electrical system – Flow-optimized metal housing, highest quality workmanship – M8 x 20mm threaded – Dimensions: 20mm high x 118mm wide (without threads) – High quality rubber bushing, vibration absorbing installation – Globally protected design. Note: See 948459 for the style matching Jetstream 3-1 taillight, brake & turn signal unit, for rear use.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Kellermann, Jetstream sequential turn signal/position light

fits  Universal 12V

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems. – Allows installation of 4 turn signals, taillight, brake light & position lights on 12V bikes – Corrects flashing frequency – Does not trigger error codes or warning lights – No disturbing fluctuating currents – For installation of flashers with lower or higher power consumption (Watt) than OEM – For installation of indicators with higher voltage (Volt) than OEM since, on some bikes with a 12 volt system, the indicators are controlled with a lower (like 6V) voltage – Allows installation of minus-switched turn signals – Rotary switches allow required flashing frequency settings Note: See 710413 for i.NEX-AddOn for use on Indian motorcycles

Δείτε περισσότερα στον κατάλογο Indian

Home > Parts > Electrical > Switches > Other > Kellerman, i.Nex – V12, equalizer

fits  Universal 12V applications.

Cold white position front light. ECE approved for front use position light. It has a 3W input and an electrical voltage of 12V. Comes with a black aluminum housing and sports Kellermann’s high power LED technology for excellent visibility. The Dayron offers a full area lighting with an extreme light output in either position light or running light through the use of the latest Kellermann clear lens technology with polycarbonate lenses. Comes with a M8 adapter. Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Lights > Auxiliary Lights > Kellermann, Dayron Innovation WL, black. No turn signal

fits  Universal 12V applications.

Warm white position front light. ECE approved for front use position light. It has a 3W input and an electrical voltage of 12V. Comes with a black aluminum housing and sports Kellermann’s high power LED technology for excellent visibility. The Dayron offers a full area lighting with an extreme light output in either position light or running light through the use of the latest Kellermann clear lens technology with polycarbonate lenses. Comes with a M8 adapter. Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Lights > Auxiliary Lights > Kellermann, Dayron Classic WL, black. No turn signal

fits  Universal 12V applications.

Cold white position front light + indicator. ECE approved for front use a position light + indicator. It has a 3/15W input and an electrical voltage of 12V. Comes with a black aluminum housing and sports Kellermann’s high power LED technology for excellent visibility. The Dayron offers a full area lighting with an extreme light output in either position light, running light or turn signal through the use of the latest Kellermann clear lens technology with polycarbonate lenses. Comes with a M8 adapter. Dimensions: 59,9mm long x 63,5mm diameter, weight 228gram.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Lights > Auxiliary Lights > Kellermann, Dayron Innovation PL, black. With turn signal