fits  77-03 XL Sportster, Buell (NU)

Used to simulate the sprocket shaft side of a flywheel so that the flywheel lateral end play can be measured and adjusted through the Timken (sprocket shaft) bearing set.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > General Tools > Measuring Tools > MCS, main bearing end play tool

fits  L82-99 XL Sportster, Buell (NU)

Installs and removes 23901-81 crank pin nut. Used when rebuilding flywheel assemblies. Machined flat at the receiving end and have a low profile with just adequate length for 100% nut to socket contact to prevent damage to socket or personal injury. Machined from 4130 chromoly steel and heat treated.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Lower End > JIMS, flywheel socket 1-3/8 x 1/2 drive

fits  86-90 4-speed XL Sportster, Buell (NU)

Used to align main and countershaft when checking for proper gear spacing

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Transmission > JIMS, transmission gear spacing tool

fits  91-99 XL Sportster, Buell (NU)

Clearanced up to about .700″ lift cams, still clearance with performance cams must be checked. Weight 143 grams each. Jims Powerglide tappets will give you a superior hydraulic function when compared with OEM style equipment, a billet steel body with hand-honed hydraulic unitcavity and an oil fed axle. To get full power, you must have zero valve lash and eliminate collapsing of the hydraulic unit as is found in the OEM unit, also called ‘the shock absorber syndrome’. Failing to keep the valve open the full amount results in power loss. The Jims Powerglide tappets come as close to a solid tappet as possible, but are still able to compensate for heat expansion. They will even work well with solid style camshafts. Fits as a direct improved replacement for OEM 18526-89.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Tappets > JIMS, Powerglide hydraulic tappet. Standard .9035″ O.D.

fits  91-99 XL, Buell (NU)

Used to lock pinion gear, when torquing down or removing the pinion nut. Use with socket wrench or hand wrench. Do not use an impact wrench.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Lower End > JIMS, Sportster pinion gear locker tool