fits  TC ’99-’06 Except ’06 Dyna, Chain Drive, Includes 594 Reaper Camshafts #1301, Cam Install kit #2058, RACE SERIES Short Travel Lifters #4050ST, Quick Install Adjustable Pushrods #4096, Chrome pushrod tubes #4095, RACE SERIES oil pump #7050, Anodized camplate #8010 and ARP Camplate/Oil Pump Fasteners #8020

BULLETPROOF CAMCHESTS! NOTE: This camchest kit is the original fitment for mechanical spring tensioners, if looking to upgrade to hydraulic tensioners (recommended) see kit #’s 7225, 7225P, 7225ST FEULING complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #. These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Complete Camchest Kits include: FEULING high volume Oil pump, high flow Camplate, REAPER Series Camshafts, short travel hydraulic roller Lifters, Quick install adjustable pushrods with .134″ wall thickness, chrome pushrod tubes, Timken Bearings, Gaskets, O-rings, Exhaust gaskets, ARP fasteners, washers, moly paste, Loctite, and hardware. Camchest kits are available in FEULING HP+ and RACE SERIES combinations and with gear drive or chain drive REAPER camshafts. Fitments available for ’99-’17 Twin Cam engines. 25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more pounds of oil pressure, quieter and smoother engine operation, eliminate wet sumping, blow by and oily air cleaners. 594 CAMS – Fiercely performing camshaft for an array of engines sizes, large displacement 103″, 110″ & 124″ engines looking for a superior torque band with excellent horsepower gains in heavy bikes (RPM 2,200 – 6,250.) Smaller high revving displacement 95″ style engines in lighter bikes looking to twist the throttle and tap into some horsepower (RPM 2,500 – 6,800). Large displacements respond well to increased compression ratio and smaller displacements will require it. 594 cams require high performance valve springs, pushrods, lifters, carburetor and or throttle body work, performance exhaust, intake and clutch. Note: 1999 model engines using key way camshafts/sprocket will need to purchase new spline style rear cam sprocket separately. Please see part #1093 or #1094. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, Race Series ST cam chest kit. Chain drive

fits  TC ’99-’06 Except ’06 Dyna, Chain Drive, Includes 525 Reaper Camshafts #1001, Cam Install kit #2059, HP+ Lifters #4000, One Piece Pushrods #4072, HP+ Oil Pump #7000, Anodized Camplate #8010 and ARP Camplate/Oil Pump Fasteners #8020

BULLETPROOF CAMCHESTS! NOTE: This camchest kit is the original fitment for mechanical spring tensioners, if looking to upgrade to hydraulic tensioners (recommended) see kit #’s 7220, 7220P, 7320, 7320P FEULING complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #. These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. HP+ SERIES Camchest Kits Include: FEULING HP+ high volume Oil pump, High Flow Camplate, REAPER Series Camshafts, HP+ hydraulic roller Lifters, One Piece Pushrods, Cam install kit with gaskets/O-rings, Timken/Koyo cam bearings, ARP cam/crank, pump/plate fasteners & washers, moly paste, Loctite, and hardware. Camchest kits are available in FEULING HP+ and RACE SERIES combinations and with gear drive or chain drive REAPER camshafts. Fitments available for ’99-’17 Twin Cam engines. 25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more pounds of oil pressure, quieter and smoother engine operation, eliminate wet sumping, blow by and oily air cleaners. 525 CAMS – A real workhorse, designed to increase torque band width and increase fuel economy. Great bolt in camshaft upgrade for stock 88″ & 96″ engines also performs very well in 103″ strokers. Produces strong low and mid range power with a linear horsepower and torque curve. Can be used with factory valve springs, pushrods and lifters. Increases throttle response and eases starting. Will also respond well to increased compression and cylinder head work. RPM 1,750 – 5,500 Note: 1999 model engines using key way camshafts/sprocket will need to purchase new spline style rear cam sprocket separately. Please see part #1093 or #1094. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, Hp+ Camchest Kit – One Piece Pushrods

fits  TC ’99-’06 Except ’06 Dyna, Chain Drive, Includes 630 Reaper Camshafts #1003, Cam Install kit #2059, RACE SERIES Lifters #4050, Feuling One Piece Pushrods, Chrome pushrod tubes #4095, RACE SERIES oil pump #7050, Anodized camplate #8010 and ARP Camplate/Oil Pump Fasteners #8020

BULLETPROOF CAMCHESTS! NOTE: This camchest kit is the original fitment for mechanical spring tensioners, if looking to upgrade to hydraulic tensioners (recommended) see kit #’s 7223, 7223P, 7223ST FEULING complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #. These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Complete Camchest Kits include: FEULING high volume Oil pump, high flow Camplate, REAPER Series Camshafts, hydraulic roller Lifters, adjustable Pushrods, Timken Bearings, Gaskets, O-rings, Exhaust gaskets, ARP fasteners, washers, moly paste, Loctite, and hardware. Camchest kits are available in FEULING HP+ and RACE SERIES combinations and with gear drive or chain drive REAPER camshafts. Fitments available for ’99-’17 Twin Cam engines. 25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more pounds of oil pressure, quieter and smoother engine operation, eliminate wet sumping, blow by and oily air cleaners. 630 CAMS – Vicious power gains, wide streetable power band from a high lift profile camshaft for high performance engines with highly modified cylinder heads and compression ratio. Carburetor and or throttle body work required along with a performance exhaust and intake system. Maintains low end performance with eye blurring mid and top end power. High performance valve springs, pushrods and lifters required. RPM 2,500 – 6,900+ Note: 1999 model engines using key way camshafts/sprocket will need to purchase new spline style rear cam sprocket separately. Please see part #1093 or #1094. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, Race Series Camchest Kit > Feuling, Race Series Camchest Kit

fits  TC ’99-’06 Except ’06 Dyna, Chain Drive, Includes 630 Reaper Camshafts #1003, Cam Install kit #2058, RACE SERIES Short Travel Lifters #4050ST, Quick Install Adjustable Pushrods #4096, Chrome pushrod tubes #4095, RACE SERIES oil pump #7050, Anodized camplate #8010 and ARP Camplate/Oil Pump Fasteners #8020

BULLETPROOF CAMCHESTS! NOTE: This camchest kit is the original fitment for mechanical spring tensioners, if looking to upgrade to hydraulic tensioners (recommended) see kit #’s 7223, 7223P, 7223ST FEULING complete camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #. These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Complete Camchest Kits include: FEULING high volume Oil pump, high flow Camplate, REAPER Series Camshafts, short travel hydraulic roller Lifters, quick install adjustable pushrods, chrome pushrod tubes, Timken Bearings, Gaskets, O-rings, Exhaust gaskets, ARP fasteners, washers, moly paste, Loctite, and hardware. Camchest kits are available in FEULING HP+ and RACE SERIES combinations and with gear drive or chain drive REAPER camshafts. Fitments available for ’99-’17 Twin Cam engines. 25-35 degree cooler engine temperatures, 15-30 degree cooler oil temperatures, 15-30 more pounds of oil pressure, quieter and smoother engine operation, eliminate wet sumping, blow by and oily air cleaners. 630 CAMS – Vicious power gains, wide streetable power band from a high lift profile camshaft for high performance engines with highly modified cylinder heads and compression ratio. Carburetor and or throttle body work required along with a performance exhaust and intake system. Maintains low end performance with eye blurring mid and top end power. High performance valve springs, pushrods and lifters required. RPM 2,500 – 6,900+ Note: 1999 model engines using key way camshafts/sprocket will need to purchase new spline style rear cam sprocket separately. Please see part #1093 or #1094. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, Race Series St Camchest Kit