fits  18-25 Softail; 17-25 Touring (excl. 23-25 VVT); 17-25 Trike

Chain drive. HP+ kits comes with HP+ lifters. This Feuling M8 camshaft kit includes chain drive camshaft, HP+ lifters and a cam installation kit that includes cam bearing, cam/crank hardware and a gasket/O-ring kit that allows for install of the factory one-piece pushrods. Feuling recommends the optional 993528 Feuling one-piece heavy duty HP+ pushrod kit, with 0.165″ wall thickness. Feuling recommends rocker box fastener kit 707450 to help prevent cylinder head cracking, this kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress on the rocker shaft standoffs. 472 CAM – The 472 Reaper is a great allround camshaft for 4-1/2 stroke 114″ – 117″ looking for a little more than our 465 grind and wanting a bolt-in. The 472 has a great bottom end with substantial gains above 2,900 RPM when compared to stock. Responds very well to increased bore and or compression, exhaust system and air cleaner. Use of performance valve-springs is not required but may result in a quieter, smoother running valve-train. See Feuling’s Endurance Beehive valve spring kits 993530 (reuse OEM steel top collars) or 588021 (with titanium top collars). Valve Lift Open Close Duration @ 50″ lift @ TDC Lobe Centerline Intake .468 8 BTDC 25 ABDC 213 .117 98.5 Exhaust .472 50.7 BBDC 7.75 ATDC 238 .110 111.5 RPM range: 1,900 – 5,900 Grind: 472 Overlap: 16. *Cam specs measured on the lifter @ 0.050″ lift with 1.61 rocker arm ratio

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Feuling, Reaper 472 HP+ cam kit