fits  13-17 FXSB (NU)

With a special slide-in frame for an easy ‘slide-in’ license plate installation. Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. Mounts to left side wheel axle and includes all required installation hardware. For 210 x 170mm size plates (width x height). With approval. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > License Plates > License Plate Brackets > Side Mount > Cult-Werk, side mount license plate bracket. Black. Austria

fits  13-17 FXSB (NU)

Gloss black finish. Radiator cover for the stock engine oil cooler. In Cult-Werk’s precision 3-D design, from ABS plastic, for a 100% precision fitment without any alteration to the bike. Includes two metal brackets, mesh for the air intakes, side covers for an invisible oil cooler and all required hardware to mount the cover to the frame. CNC machined and mounting holes bored for a hasslefree installation that should not take more than 30 minutes. Note: With approval. Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Chassis & Frames > Frame Accessories > Spoilers & Radiator Covers > Cult-Werk, radiator cover ‘Racing’. Gloss black

fits  13-17 FXSB (NU)

2-piece upper kit. Perfect for a visual Black-Out update. Manufactured from billet aluminum with CNC machined precision with a gloss black powder coated finish. These upper covers cover the fork tubes between upper and lower triple tree. Note: See 587879 for the matching lower cover set.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Forks > Hydraulic Forks > Fork Covers > Killer Custom, upper fork cover set. Black

fits  13-17 FXSB (NU)

8.25″ wide to 8.75″ wide. Chrome. 10 gauge steel. Mounts to outside of fender struts. Takes all 8.25″ wide Cycle Visions sissy bars. Note: Appropriate docking hardware must be purchased separately. Note: Rear turn signal relocation may be required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Seats & Sissybars > Sissy Bars > Side Plates & Mounting Kits > Cycle Visions, rigid sissy bar side plates. Chrome

fits  13-17 FXSB (NU)

Single flange; All Ness wheels are precision machined from radial forged 6061-T6 aluminum and structurally testeds. The special hidden hub design includes wheel bearings. Both are installed and pre-set by Ness for optimal radial and lateral runout accuracy. Wheels are compatible with both ABS and non-ABS models. Each hub includes several ABS outer rings. How to order a Ness wheel: Rims and hubs are sold separately. All hubs fit all rims. So pick the hub that will fit your bike, then choose the wheel style, width and diameter you desire

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Wheels > Hubs > Arlen Ness, Wheel hub front black

fits  13-17 FXSB (NU)

Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. Mounts to left side wheel axle and includes all required installation hardwareThis comes with approval. For 210 x 143mm size plates (width x height). Note: Style compatible with Cult-Werk’s front and rear fender, air cleaner cover, front axle cover kit, fork tube cover kit, fork tube caps, upper fork covers, master cylinder cover, point cover, belt guard, front turn signal brackets and derby cover for models. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > License Plates > License Plate Brackets > Cult-Werk, side mount license plate bracket. Netherlands

fits  13-17 FXSB (NU)

With approval. Transforms the to a more aggressive look with 100% Night Rod flavour. Kit includes a stock LED headlamp and CNC machined steel brackets which will lower the headlamp a noticeable 30mm for a longer a sleeker look. The speedometer will remain in the stock position. The headlamp mask is manufactured from ABS and CNC machined for a Cult-Werk style picture perfect fitment. Note: No additional holes required and the kit will work with stock cables and wiring. Note: Included LED headlamp must be soldered to the OEM wiring. Note: Kit cannot be used in combination with the original headlamp, included LED headlamp must be used. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Lights > Head Lamps > Head Lamp Brackets > Cult-Werk, LED headlamp kit Night Rod style

fits  13-17 FXSB (NU)

Black zinc plated finish, for a lasting good look. Great for the finishing touch in a blacked-out Breakout. Kit includes two bolts for the upper and two bolts for the lower triple tree.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Brakes > Master Cylinders & Parts > Handlebar Master Cylinder > Covers > Cult-Werk, triple tree bolts, black

fits  13-17 FXSB (NU)

Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. Mounts to left side wheel axle and includes all required installation hardwareThis comes with approval. For 210 x 130mm size plates (width x height). Note: Style compatible with Cult-Werk’s front and rear fender, air cleaner cover, front axle cover kit, fork tube cover kit, fork tube caps, upper fork covers, master cylinder cover, point cover, belt guard, front turn signal brackets and derby cover for models. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > License Plates > License Plate Brackets > Cult-Werk, side mount license plate bracket, black. France

fits  13-17 FXSB (NU)

Gloss black powder coated CNC machined steel with pre-installed ECE approved LED license plate illumination. Extra short mount for a close-to-the-bike-installation for the integrated look. Mounts to left side wheel axle and includes all required installation hardwareThis comes with approval. For 180 x 200mm size plates (width x height). Note: Style compatible with Cult-Werk’s front and rear fender, air cleaner cover, front axle cover kit, fork tube cover kit, fork tube caps, upper fork covers, master cylinder cover, point cover, belt guard, front turn signal brackets and derby cover for models. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > License Plates > License Plate Brackets > Cult-Werk, side mount license plate bracket, black. Germany