fits  08-24 H-D e-throttle with 1″ I.D. risers (NU)

Chrome. 1.25″ diameter. A design that allows you to fine-tune your bars to your arms instead of the other way around. The finest ride ever is within reach! Approx. dimensions: 10″ rise x 10″ center width x 35″ wide. Note: Handlebar ar is notched for electronic throttle but can be used for cable throttle models. Bar is just a little shorter on the throttle side.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Arlen Ness, 1-1/4″ modular Mini Apes. Chrome, 10″ rise

fits  08-24 H-D e-throttle with 1″ I.D. risers (NU)

Black. 1.25″ diameter. A design that allows you to fine-tune your bars to your arms instead of the other way around. The finest ride ever is within reach! Approx. dimensions: 10″ rise x 10″ center width x 35″ wide. Note: Handlebar ar is notched for electronic throttle but can be used for cable throttle models. Bar is just a little shorter on the throttle side.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Arlen Ness, 1-1/4″ modular Mini Apes. Black, 10″ rise

fits  82-22 H-D (Excl. 08-22 e-throttle) with 3-1/2″ mount bolt spacing (NU)

Drilled for internal wiring. Fatbars bars give a massive look to complement massive bikes and Tiller bars do it better than most. Thinner 1″ (25.4mm) diameter where controls are mounted. Approx. dimensions: 32.75″ (83cm) wide x 10″ (25.4cm) rise x 11.5″ (29cm) pullback

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Fat 1-1/4″ tiller bar, 10″ rise, chrome

fits  82-22 H-D (Excl. 08-22 e-throttle) with 3-1/2″ mount bolt spacing (NU)

Satin black powder coated finish. Drilled for internal wiring. Fatbars bars give a massive look to complement massive bikes and Tiller bars do it better than most. Thinner 1″ (25.4mm) diameter where controls are mounted. Approx. dimensions: 32.75″ (83cm) wide x 10″ (25.4cm) rise x 11.5″ (29cm) pullback

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Fat 1-1/4″ tiller bar, 10″ rise, black

fits  Pre-81 H-D with 1″ I.D. risers

Black finished steel; non-dimpled; Approx. dimensions: 10″ (25.4cm) rise x 32 1/2″ (82.6cm) wide x 8″ (20.3cm) center width x 7″ (17.8cm) pullback

Δείτε περισσότερα στον κατάλογο Street

Home > Parts > Handlebars & Hand Controls > Handlebars > Apehanger handlebar, 10″ rise, 1″ black

fits  Pre-81 H-D with 1″ I.D. risers

Chrome plated steel; non-dimpled; Approx. dimensions: 10″ (25.4cm) rise x 32 1/2″ (82.6cm) wide x 8″ (20.3cm) center width x 7″ (17.8cm) pullback

Δείτε περισσότερα στον κατάλογο Street

Home > Parts > Handlebars & Hand Controls > Handlebars > Apehanger handlebar, 10″ rise, 1″ chrome

fits  82-24 FLH/T (excl. CVO’s); 08-23 FLHX Touring with mech. or e-throttle, traditional Batwing fairing and 1″ I.D. risers (NU)

Chrome; Steel; Approx. dimensions: 10″ rise x 36″ wide x 11″ pullback x 14″ center width x 40° wrist angle. Compatible with models with 1″ diameter riser area only. Custom designed for FLH, FLHX, FLHT & FLHTC Touring models with Batwing fairing (excl. FLTR), with or without e-throttle, to enhance riding comfort. Depending on installation rotation in the risers a 1 to 2.5″ higher end rise and 1.5″ to 2.5″ more pullback can be expected when compared to stock bars. The grips are positioned behind the fairing. Bars are dimpled and drilled for internal wiring and have smooth inside corners to prevent wiring damage and ease in wiring pull-through.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Wild1, 1-1/4″ Chubby Bagger Ape. Chrome, 10″ rise

fits  82-24 FLH/T (excl. CVO’s); 08-23 FLHX Touring with mech. or e-throttle, traditional Batwing fairing and 1″ I.D. risers (NU)

Satin black powder coated; Steel; Approx. dimensions: 10″ rise x 36″ wide x 11″ pullback x 14″ center width x 40° wrist angle. Compatible with models with 1″ diameter riser area only. Custom designed for FLH, FLHX, FLHT & FLHTC Touring models with Batwing fairing (excl. FLTR), with or without e-throttle, to enhance riding comfort. Depending on installation rotation in the risers a 1 to 2.5″ higher end rise and 1.5″ to 2.5″ more pullback can be expected when compared to stock bars. The grips are positioned behind the fairing. Bars are dimpled and drilled for internal wiring and have smooth inside corners to prevent wiring damage and ease in wiring pull-through.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Wild1, 1-1/4″ Chubby Bagger Ape. Black, 10″ rise

fits  82-24 H-D mech. or e-throttle (excl. 88-11 Springers) with 1″ I.D. risers (NU)

Chrome; Steel; Approx. dimensions: 10″ rise x 33 1/2″ wide x 10″ outside base width x 8″ pullback

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Wild 1, 1-1/4″ Chubby Outlawz Apes. Chrome, 10″ rise

fits  82-24 H-D mech. or e-throttle (excl. 88-11 Springers) with 1″ I.D. risers (NU)

Satin black powder coated; Steel; Approx. dimensions: 10″ rise x 33 1/2″ wide x 10″ outside base width x 8″ pullback

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Handlebars > Wild 1, 1-1/4″ Chubby Outlawz Apes. Black, 10″ rise