fits  07-17 96″/103″ Twin Cam (NU)

This assembly is not available from OEM. It is designed to be used as an OEM reproduction style replacement for the connecting rod assemblies installed in the OEM crankshaft assemblies 07-17 Softail 23912-07 (07-09), 23912-07A (2010 only), 23912-07B (11-17) and in 07-17 Dyna/07-16 Touring 23729-07 (07-11), 23729-07B (12-17). All OEM part numbers are superseded by OEM 24100022. With late OEM style tapered small end. Incl. connecting rods, crankpin, crankpin plugs, thrust washers, rollers and retainers.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Connecting Rods > Daytona, connecting rod assembly, 96″/103″ Twin Cam

fits  07-17 96″/103″ Twin Cam (NU)

Forged big bore conversion piston set. Used for converting 96″ (3-3/4″ bore) and 103″ (3-7/8″ bore) to 110″ (4″ bore) big bore. With dished piston domes. Works with all stock cylinder heads, 96″ and 103″ with 85cc chamber and SE, MVA and CVO with 95cc chambers. 9.5:1 CR with stock 96″/103″ 85cc head. Piston weight 350gr. Piston pin weight 89gr. Piston pin dia. .927″ / offset. Head type: Dish with +13.3cc. Compression height 1.086″. Bore 4.000″. Stroke 4.375″ (4-3/8″). Rod length 7.667″. Cyl. length 4.938″. Note: Will not work as bolt-in with OEM H-D 4″ big bore conversion cylinders in OEM 96″ & 103″ crankcases. The cylinders will hit a small step in the crankcase. Also clearance between piston skirt and crankcase must be checked at bottom dead center. Cases with a large cast-in bump, just below the machined area for the cylinder sleeve, must be machined for adequate piston skirt to crankcase clearance. This is on both front & rear cylinder exhaust sides of the crankcase. Note: Will not fit 110″ CVO models. Note: All KB forged pistons come equipped with offset wrist pins / piston pins. There is a front and rear section on the piston and it is necessary to install it in the correct way. Please refer to the installation instructions, as provided with each piston set, prior to installation.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Top End > Pistons > Piston & Cylinder Kits > KB Performance, 96″/103″ to 110″ Twin Cam piston kit. +.030″