fits  Wheels: 73-99 B.T., TC, XL, Buell (NU). Swingarms: 58-86 4-speed Big Twin (NU)

Used to remove and install the wheel bearing races, of Timken style bearings, of models with 3/4″ (19mm) diameter wheel axles. The Fast Eddy wedge spacer features small but strong magnets that keep the drivers in place while you slide in the driver handle. Can also be used to remove the Timken bearing races in swingarms of 58-86 4-speed Big Twin models. – Magnetic hold between drivers and wedge spacer – Super-easy to work with – No longer you have to try and hold them in with one hand while you slide in the driver handle – Made from heat treated US steel for reduced wear without becoming brittle – Also removes the Timken bearing races in swingarms of 58-86 4-speed Big Twin models. Note: Requires use of 998377 driver handle with magnetic wedge spacer, which must be ordered separately.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Wheel & Tire > Fast Eddy, 3/4″ wheel bearing race remover/installer tool

fits  07-23 H-D with hollow wheel axles

Includes 2 plugs. Plugs into left & right side of axle and are used to find the correct center point, for correct wheel alignment, on late H-D models with hollow axles. Just lube the O-rings and insert into the rear axle for correct alignment.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Wheel & Tire > MCS, hollow axle plug tool

fits  18-22 M8 Softail

Used to check rear wheel alignment. Inserts into the hollow wheel axle, the precision sliding stainless indicator rod is used for measurement. Works with most exhaust systems installed.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > Motion Pro, M8 Softail rear wheel alignment tool

fits  06-22 Touring

Used to loosen and tighten the rear OEM 8020 axle wheel nut, without removing the muffler. A time saver when making adjustments to belt tension or wheel aligment.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > MCS, Touring rear axle nut tool

fits  00-24 Big Twin; 00-22 (NU) XL Sportster; 02-17 (NU) V-Rod. (ABS or non-ABS)

Used to remove and install all 3/4″ and 1″ ID sealed roller bearings without damage to wheels. Works with ABS and non-ABS models.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > MCS, 00-up sealed wheel bearing install/remove tool

fits 

Split collet design. Includes large and small drivers, 10mm, 12mm, 15mm, 17mm, 20mm, and a 25mm remover to solve most bearing removal challenges.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > Motion Pro, metric wheel bearing remover kit. 8-piece

fits  02-22 Touring

Used to loosen and tighten the rear wheel axle nut on baggers. Includes a 36mm socket, a captive swivel extension with 1/2″ drive and is rated for up to 175 ft. lb (237 Nm) of torque. Tool is black oxide coated and comes with a durable plastic sleeve for exhaust protection.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > Motion Pro, rear axle socket tool

fits  00-24 Big Twin; 00-22 (NU) XL Sportster; 02-17 (NU) V-Rod. (ABS or non-ABS)

Split collet design. Used to remove ball bearings with 3/4″ (19.05mm), 1″ (25.4mm) and 25mm inside diameter from wheels

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > Motion Pro, ball bearing remover kit for wheels

fits  08-22 H-D with hollow 1″ or 25mm wheel axles

Used to positively align wheel with swingarm, swingarm spacers and caliper brackets. Prevents getting your blood pressure way up there when the wheel axle is inserted. Quick and without hassle is the new name of the game.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > JIMS, wheel axle installer tool

fits  14-24 Touring with cast wheels; some CVO and/or accessory wheels with outboard mounts

Optional support plate for wheels with outboard mounts. Used with JIMS 978386 wheel bearing tool to prevent damage to some Cast/CVO and/or accessory wheels with outboard mounts. Note: For use with JIMS 978386 tool.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Wheel & Tire > JIMS, wheel bearing support plate