fits 

– Used in the removal and installation of fork caps on 1948 and later Wide Glide models with 41mm fork tubes – Reduces the risk of damage to the fork caps during removal and installation – 1/2 inch square drive – Machined from 6061-T6 aluminum with durable blue anodizing and laser engraved markings

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Front End > Motion Pro, fork cap socket tool. 41mm

fits  Most 87-22 Big Twin and XL Sportster models with 39mm fork tubes (NU)

– Use for removal and installation of the fork cap nut (1-3/8″ hex) – Thin socket measures just 9/32″ deep by 5/8″ tall – O-ring insert to help protect the top of the cap – 1/2 inch square drive – Machined from 6061-T6 aluminum with durable blue anodizing and laser engraved markings

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Front End > Motion Pro, fork cap socket tool 39mm

fits  Ohlins FKS 212, FKS 221 and FKS 228 model cartridges.

The Kraus 41mm Fork Cap Tool will help in installation of specific Ohlins cartridges and forks. This tool has a six sided hex shape measured 41mm side to side.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Front End > Kraus, 41mm Fork Cap Tool

fits  Ohlins FKS 508 model cartridge

The Kraus 50mm Fork Cap Tool will help in installation of specific Ohlins cartridges and forks. This tool has an eight sided octagon shape measured 50mm side to side.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Front End > Kraus, 50mm Fork Cap Tool

fits  KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), and Öhlins FKS 508s

Required for Öhlins fork rebuilding and cartridge installation of Öhlins FKS 508 cartridges. This tool uses a 3/8″ drive end and provides easier assembly and disassembly when servicing specific Öhlins forks. Designed and engineered to be used with the KRT Forks (FF52X), Dynamoto Forks (FGRT 205s), and FKS 508s

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Workshop > VTwin Tools > Front End > Kraus, cartridge seal head driver tool

fits  Universal. Designed to replace the OEM H-D® tool HD-590000-B, Buell® B-590000-B and Indian® PV-59000A tools

Use this tool to check and adjust the oil level on conventional and single chamber cartridge forks. Adjustable ring will measure oil levels from 0 to 300 mm in 5 mm increments. Syringe has a capacity of 60 ml. New plunger head design features two fluorocarbon elastomer X-Ring seals that provide superior sealing and chemical resistance. Billet aluminum plunger knob with durable black anodized finish. New plunger head design allows easy cleaning and replacement of seals. Replacement seal is p/n C08-0742H. Can also be used on bicycles equipped with front suspension. Designed to replace the OEM H-D® tool HD-590000-B, Buell® B-590000-B and Indian® PV-59000A tools.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Front End > Motion Pro, pro fork oil level tool

fits  Universal

‘- Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps, and bearing retainers. – Freely pivoting arms span a range of 10.5 mm to 150 mm. – Interchangeable 3, 4 and 5 mm hardened steel pins with a black oxide coating. – Integrated 3/8″ square drive for use with a breaker bar or torque wrench. – Curved, low profile arms easily fit tight areas. – Billet heat treated steel construction for increased strength, rigidity and durability. – Durable black oxide finish with laser engraved markings. – Maximum torque rating of 70 lbs-ft. Note: Replacement pins available as 937999.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Front End > Motion Pro, heavy duty pin spanner

fits  Universal

This is a front fork & rear shock absorber maintenance tool. It is used to securely hold the front fork slider for maintenance like oil & seal change. It also will hold the rear shock absorber, on body, shaft or shock reservoir, for maintenance work like spring, piston rod, seal head removal etc. – Designed to make suspension service simple and quick. – Holds shocks and forks securely while you change oil, re-valve, or change seals. – Pivoting head holds parts in any position, with mechanical stops every 45 degrees. – Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system. – Large side holds 40 mm to 61 mm diameter parts. – Small side holds 16 mm to 34 mm diameter parts. – Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a workbench. – Movable fluid catch pan with mesh insert, and threaded drain bung. – HOW IT WORKS ON FORKS – – Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip. – Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements. – Can be used to assist in removing compression valve assembly (use of stock front axle required). – HOW IT WORKS ON REAR SHOCK ABSORBERS – – Holds shock firmly around shock body, shaft or shock reservoir. – Facilitates removal of piston rod and seal head. – Facilitates removal of shock reservoir caps, chamber pistons or bladder. – Holds shock to remove spherical bearings or needle bearings. – Holds shocks for removal of shock spring.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Front End > Motion Pro, Pivot suspension vise tool

fits  Most H-D with 39mm or 41mm fork tubes

Used to help install fork tube plugs on forks with a lot of spring pre-load. Will work on most 39mm and 41mm H-D front ends.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Front End > MCS, 39mm & 41mm fork spring compressor set

fits  Most H-D with 1-3/8″ hex fork tube plugs

Used to remove and install most Big Twin and Sportster models with (1-3/8″ hex) fork tube plugs. 1/2″ drive. With o-ring insert to help prevent plug scratching.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Front End > MCS, fork tube cap socket