fits  49-24 Big Twin (Excl. 14-up Touring, Trike); 21-24 RA1250 Pan America models; 21-24 RH 1250/975 models; 78-22 XL Sportster; 87-02 Buell

Used to install & remove the Timken style neck races in the frame neck or in the frame cup. Works with all models with a 1″ steering stem. The Fast Eddy wedge spacer features small but strong magnets that keep the drivers in place while you slide in the driver handle. Manufactured heat treated tool steel to reduce wear. – Magnetic hold between drivers and wedge spacer – Super-easy to work with – No longer you have to try and hold them in with one hand while you slide in the driver handle – Made from heat treated US steel for reduced wear without becoming brittle – Also removes the Timken bearing races in swingarms of 58-86 4-speed Big Twin models. Note: Requires use of 998377 driver handle with magnetic wedge spacer, which must be ordered separately.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Frame & Swingarm > Fast Eddy, Timken steering head race tool

fits  49-84 FL, FX, FXWG; 84-86 Softail (NU); Custom H-D frames with neck cups

Used to remove stubborn neck bearing frame cups from the frame neck with controlled force. Fits all external 48311-60 style neck cups on 49-87 models with a 1″ fork stem (where I.D. of neck cup is approx. 1.050″ / 26.67mm). Note: Tool 998351 requires 998377 driver handle with magnetic wedge spacer. USA made.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Frame & Swingarm > Fast Eddy, neck cup removal tool

fits  49-84 FL, FX, FXWG; 84-86 Softail; Custom frames with H-D style frame neck cups

Used to press bearing neck cup into the frame neck and bearing races into the cups. Neck cups can be as much as a .004″-.006″ interference fit. That’s why it takes a big hammer when you install them that way. This tool gently presses them in like butter without damage or uncontrollable forces. – Makes easy work of installing neck cups & races into motorcycle frames – Incorporates unique thrust bearing system – Critical components made from steel alloy that has roughly double the tensile strength of mild carbon steel – Quick-adjustable length to work with a wide variety of H-D, aftermarket, and custom made frames – Comes with 2 anvils that work with all H-D neck cups that are the tapered roller bearing type – If you have an oddball motorcycle and the anvils don’t fit your cups, the adjustable length allows you to make extra spacers that better fit your cups – Cerakote finish – USA made. Note: Fast Eddy advises you to only press cups in your frame that already have pre-installed races. Or press new races into the cups at the same time you’re pressing the cups into the frame. Do not press cups into the frame without bearing races.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Frame & Swingarm > Fast Eddy, steering head cup install tool

fits  Tapered bearing races from 47 mm to 55 mm OD

– Designed to quickly and precisely remove outer bearing race from the steering head without the use of a hammer and punch – Puller design ensures bearing is pulled perfectly straight to eliminate possible damage to frame – Works on all tapered bearing races from 47 mm to 55 mm OD – Precision machined anodized aluminum cup will not damage seal surface – Brass bearing washers for easy use and long life – Hardened steel jaws engage securely on inner bearing lip

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > Motion Pro, steering head race puller

fits  Swingarm: 84-14 Softail (NU). Springer fork: 97-09 FLSTS Springer Softail (NU).

Used to remove and install OEM 9076 & 9270A swingarm pivot bearings on swingarms. Can also be used on the OEM 9141 spherical fork to rocker bearings on FLSTS Springer models.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > MCS, Softail swingarm & fork bearing tool

fits  49-24 Big Twin (Excl. 14-up Touring, Trike); 21-24 RA1250 Pan America models; 21-24 RH 1250/975 models; 78-22 (NU) XL Sportster; 87-02 (NU) Buell

Used to install steering head cups and tapered races in the frame neck.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > MCS, steering head cup & race install tool

fits  02-24 FLT/Touring

Swingarm bearings must be installed and aligned accurately for good handling. Both drive side and brake side bearings, which are at different depths, can be easily and accurately installed with this tool kit. includes a remover to press the spacer out of the bearing.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > JIMS, swingarm bearing install tool

fits  82-94 FXR; 80-01 FLT/Touring (NU)

Used to install the swingarm in a 5-speed rubber mount frame. When the bushing assemblies (cleve blocks) are replaced they need to be positioned to install in the rear of the transmission. This tool will spread the swingarm bushing assembly allowing the installation of the swingarm. Note: See 978378 JIMS cleve block bushing assembly tool for bushing removal and installation.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > JIMS, cleve block spreading tool

fits  82-94 FXR; 80-01 FLT/Touring (NU)

Used to remove and replace the swingarm bushing assembly (cleve blocks / OEM 47556-81). Prevents damage to the bushing assembly

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > JIMS, cleve block bushing assembly tool

fits  WHEEL: 73-99 B.T., XL BUELL; SWINGARM 58-86 4-SP B.T.(NU)

Used to remove & install wheel bearing and swingarm bearing races Note: Used with 920542 JIMS driver handle

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Frame & Swingarm > Jims, wheel/swingarm bearing race tool