fits  99-17 (NU) Twin Cam; 17-25 M8

This tool allows you to test all Twin Cam and M8 piston cooling jets. Leaking piston cooling jets can send too much oil into the crankcase, causing high engine oil sump levels. Clogged cooling jets can reduce or eliminate lubrication to the pistons and cylinders. Helps diagnose or prevent issues prior finishing up an engine build. Note: This 707289 tester block is designed to be used with Feuling’s 566117 Twin Cam pressure relief valve tool. This 707289 block Includes the tool plate and fasteners to be used with Feuling’s 566117 tool. Note: See 707290 for the complete & ready to use piston cooling jet tester kit.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, piston cooling jet tester block

fits  99-17 (NU) Twin Cam; 17-25 M8

This tool allows you to test the piston cooling jets. Leaking piston cooling jets can send too much oil into the crankcase, causing high engine oil sump levels. Clogged cooling jets can reduce cooling. Helps diagnose and prevent issues before finishing the engine build. This is a complete kit including the tool plate, pressure gauge, regulator and hardware. Note: If you already have Feuling’s 566117 Twin Cam pressure relief valve test tool, you just require 707289 tester block only to be able to test the piston cooling jets.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, piston cooling jet tester block kit

fits  H-D with 110″ Screamin’ Eagle cylinder heads with the cut out and SE plates

Direct replacement for the factory Screamin’ Eagle 110″ cylinder heads plates. Bolts into the factory cutout on the special 110″ cylinder heads. USA made. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, 110″ cylinder head plate set

fits  17-25 M8 with SE heads or customized heads with plates

Replaces the factory Screamin’ Eagle cylinder heads plates, heavy duty sticky tape glues plates onto the factory plates on SE cylinder heads. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, M8 Cylinder Head Plates

fits  Measures valve spring installed height for Evo, Xl, and Twin Cam models

Gauge to exactly measure installed spring height. Place tool on cylinder head in place of valve spring with spring cup and retainer in place, twist measuring tool to get accurate spring height measurement. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, installed valve spring height tool

fits  .420 OD for Feuling seals 566045

Used to cut the valve guide outer to correct outer diameter. Cuts to .420″ OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster). Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. – 707268 .420″ OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) – 707269 .500′ OD for Feuling seals 566048 (.500″ OD guides with 5/16″ stems) – 707270 .530″ OD for Feuling seals 566047 (H-D with Screamin’ Eagle cylinder heads with .530″ OD guides with 5/16″ stems). Valve seat spring cutters: – 707258 .625″ ID x 1.565″ OD – 707259 .625″ ID x 1.635″ OD – 707260 .625″ ID x 1.750″ OD – 707261 .550″ ID x 1.180″ OD. Cutter uses the following Pilots: – 707265 Fits valve guides with 3/8″ ( 9.53mm) valve stem, 48-83 Pan & Shovel – 707263 Fits valve guides with 5/16″ (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL – 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam – 707262 Fits valve guides with 6mm valve stem, 17-up M8 – 707266 Fits valve guides with 11/32″ (7.7313mm) valve stem. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, valve guide OD cutter for 566045 seals

fits  .500 OD for Feuling seals 566048

Used to cut the valve guide outer to correct outer diameter. Cuts to .500′ OD for Feuling seals 566048 (.500″ OD guides with 5/16″ stems). Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. – 707268 .420″ OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) – 707269 .500′ OD for Feuling seals 566048 (.500″ OD guides with 5/16″ stems) – 707270 .530″ OD for Feuling seals 566047 (H-D with Screamin’ Eagle cylinder heads with .530″ OD guides with 5/16″ stems). Valve seat spring cutters: – 707258 .625″ ID x 1.565″ OD – 707259 .625″ ID x 1.635″ OD – 707260 .625″ ID x 1.750″ OD – 707261 .550″ ID x 1.180″ OD. Cutter uses the following Pilots: – 707265 Fits valve guides with 3/8″ ( 9.53mm) valve stem, 48-83 Pan & Shovel – 707263 Fits valve guides with 5/16″ (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL – 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam – 707262 Fits valve guides with 6mm valve stem, 17-up M8 – 707266 Fits valve guides with 11/32″ (7.7313mm) valve stem. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, valve guide OD cutter for 566048 seals

fits  .530 OD for Feuling seals 566047

Used to cut the valve guide outer to correct outer diameter. Cuts to .530″ OD for Feuling seals 566047 (H-D with Screamin’ Eagle cylinder heads with .530″ OD guides with 5/16″ stems). Valve guide OD cutters: Used to cut the valve guide outer to correct outer diameter. – 707268 .420″ OD for Feuling seals 566045 (84-99 Evo Big Twin; 99-04 Twin Cam; 86-03 XL Sportster) – 707269 .500′ OD for Feuling seals 566048 (.500″ OD guides with 5/16″ stems) – 707270 .530″ OD for Feuling seals 566047 (H-D with Screamin’ Eagle cylinder heads with .530″ OD guides with 5/16″ stems). Valve seat spring cutters: – 707258 .625″ ID x 1.565″ OD – 707259 .625″ ID x 1.635″ OD – 707260 .625″ ID x 1.750″ OD – 707261 .550″ ID x 1.180″ OD. Cutter uses the following Pilots: – 707265 Fits valve guides with 3/8″ ( 9.53mm) valve stem, 48-83 Pan & Shovel – 707263 Fits valve guides with 5/16″ (7.9375mm) valve stem, 84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL – 707264 Fits valve guides with 7mm valve stem, 05-17 Twin Cam – 707262 Fits valve guides with 6mm valve stem, 17-up M8 – 707266 Fits valve guides with 11/32″ (7.7313mm) valve stem. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, valve guide OD cutter for 566047 seals

fits  99-17 (NU) Twin Cam; 17-25 M8

Aligns the oil pump gear flats with the flats of the crankshaft. Feuling recommends assembling the cam support plate, oil pump, camshaft etc. together on the bench, lining up the oil pump gear flats with crankshaft flats and installing the complete assembly into the cam chest as one complete unit. This procedure has proven to provide the best seal on the back scavenge port of the oil pump to engine case as the parts are always going inwards towards the scavenge port. Twin Cam: Rotate the crankshaft flats so they are horizontal and align oil pump gear flats horizontal to match. M8: Rotate the crankshaft flats so they are vertical and align oil pump gear flats vertical to match.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, oil pump gear alignment tool

fits  84-99 Evo B.T.; 99-04 Twin Cam and 86-22 Evo XL. In custom applications (NU)

Used to cut the top of the valve guide, to increase clearance between bottom of valve spring retainer and top of valve guide seal. Uses pilots 707272 (5/16″ stem) or 707273 (7mm stem), which must be ordered separately. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Top End > Feuling, valve guide height cutter