fits 

9-step 12V / 12.8V 1.25A sealed battery saving charger & maintainer for AGM, GEL & STD 12V and works with 12.8V Li-Ion made batteries with LiFe & LFP technology. Note: Quad program – select program 1 or 3 to charge battery direct or through a live (hot) 12V socket, or program 2 or 4 to charge through BMW CAN-bus controlled 12V socket. Will require optional cable accessory to connect to socket. – Fully automatic and safe charger / trickle charger for 24-7 use – BMW CAN-bus compatible, automatic activation – Smart desulphation from 0.5V, for Pb (conventional lead acid) batteries – Low voltage recovery & BMS reset, for LFP battery – Tests battery state of health – Energy saving technology – Stand-by power less than 0.5W – Efficient 24-7 battery maintenance – Weatherproof – Rated for use down to -40°C / -40°F – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected – Includes weatherproof battery lead, battery clip set & hanging hook.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > Battery Chargers > Tecmate, OptiMate 4 Quad Program

fits  Universal

Bronze. 5-step 12V / 12.8V 2A sealed battery maintainer. For Lead Acid, AGM, GEL 12V batteries from 6 to 96Ah and 12.8/13.2V lithium (LiFePO4) batteries. It senses the battery condition, recharges and then keeps the battery 100% ready. The fully automatic maintenance program provides what the battery needs, never overcharges, never undercharges. – Charging Amps: 2A (constant current) – Charging volts: nominal: 12V & 12.8V range: 4V – 14.4V – Indoor / Outdoor (lowest temperature: -40°F / -20°C) – For Lead Acid, AGM & GEL 12V batteries from 3 – 96Ah – Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed – Weatherproof case with wall mounts – Incl. 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector – weatherproof battery lead & battery clip set – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term 24-7 battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο

Home > Workshop > Battery Chargers > Tecmate, Optimate, 2 Duo 12V battery charger. Bronze

fits  Universal

9 step 12V / 12.8V 1.25A sealed battery saving charger & maintainer for AGM, GEL & STD 12V batteries from 4 – 60Ah & Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 15Ah. OptiMate 4 Quad Program tests before & after charging and can recover a ‘dead-flat’ lead-acid & lithium (LiFePO4) battery from as low as 0.5 Volts. – Selectable, 4 charge programs: 1).12V Smart desulphation: 0.5V – 14.4V. 2). BMW CAN-bus compatible: 5V – 14.4V. 3). 12.8V Low Volt Recovery: 0.5V – 14.4V. 4). BMW CAN-bus compatible: 8.8V – 14.4V. – Charging Amps: 1.25A (constant current) – Indoor / Outdoor (lowest temperature: -40°F / -40°C) – Save: Low Volt Start of 0.5V + 2-step* desulphation recovery (*1-step low volt pulse save during CAN-bus mode) – For 4 x Lead Acid, AGM & GEL 12V batteries from 3 to 50Ah – Input: Global (100-240V 50-60Hz), high efficiency (CEC listed) – Weatherproof case with wall mounts – Incl. 6ft. / 180cm AC supply lead and 6ft. / 180cm charge lead ending in SAE connector. Weatherproof battery lead, battery clip set & hanging hook – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > Battery Chargers > Tecmate, OptiMATE 4 Quad Program 12V battery charger

fits 

5.0A 12V. For 20Ah to 160Ah lead-acid (AGM, GEL, EFB, MF, CaCa) batteries. This CT5 TIME TO GO battery charger and trickle charger / maintainer is a world first since it and answers the question: ‘When will my battery be fully charged?’ After connecting it calculates the remaining charging time in hours, presenting it to you in a countdown style. When it is safe for the battery to start, before the battery is fully charged, it will let you know. A time saver. The CT5 TIME TO GO uses advanced technology with three charging and maintenance programs: Normal (lead acid batteries), AGM (Absorbed Glass Matt) and Recond (an automatic desulphation program to recondition a sulphated battery, to it more efficient again). During winter time, or other long storage times the CT5 TIME TO GO can be left connected to the battery for as long as you wish. It will never allow under or overcharging of the battery. – 12 V / 5A / 14.4/14.7/15.8V – 20-160Ah compatible – Compatible with lead-acid (AGM, GEL, EFB, MF, CaCa) batteries – ‘Try’ indicator shows when it is safe to make one attempt to start – Test and restore battery capacity – Normal program for medium lead-acid batteries – AGM program for medium lead-acid AGM batteries – Safe spark free operation – Reverse polarity protected – Short circuit proof – Splash and dust proof (IP65)

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Workshop > Battery Chargers > Ctek, battery charger ct5 time to go eu

fits  Universal

With EU wall plug. Professional variable 0.4A to 10A 12V diagnostic battery charger-tester & power supply for powersport & small craft / machine professionals, repair shops and battery retailers. – Pro use: 12V lead-acid STD & AGM from 3-50Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-20Ah. – Normal use: 12V lead-acid STD & AGM from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) from 2-120Ah. – Charging Amps: 0.4A to 10A variable (Ampmatic) – Charging Volts: 12V lead-acid: 0.5V to 22V. 12.8V/13.2V Lithium LFP (LiFePO4): 0.5V to 14.4V. Powersupply: 11V to 13.6V. – Operation: selectable – 11 step charger – 3 Selections: Select a charge mode for 12V lead-acid OR 12.8V LiFePO4, or select PowerSupply mode for battery support during vehicle diagnostics, tuning or troubleshooting – Automatic fast battery activation: flashing green test light indicates battery is healthy and sufficiently charged – Smart recovery mode for deep discharged batteries, a bad battery is quickly identified, a good battery receives charge is retested after – Pushbutton activated BMS reset for LiFePO4 batteries – Test indication for GOOD (80 to 100%), OK (60 to 80%) and BAD (below 60%) batteries – Powersupply mode provides constant power for vehicle tuning, diagnostics and troubleshooting – Case with rubber bumbers, with wall-mount or hanger bars. AC Class 2 input socket, with ON/OFF switch, 15cm / 6″ output cord – Certification – CE, UKCA, NRTL (UL & CSA), PSE (Japan), SAA (Aus & NZ) – Indoor use. IP40 rating – Included cables: Class II AC cord suitable for region, O-43 charge lead extender 180cm/72″ and O-14 fused battery clips – Vehicle hanging hook and wall receiver included

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Pro 1 DUO 12B 10A battery charger

fits  With EU plug

8A 12V charger. For 3Ah to 180Ah lead-acid (AGM, GEL, EFB, MF, CaCa) and lithium batteries. The CS ONE has APTO (Adaptive Charging) technology to recognise the type of battery you want to charge and tells how long it will need to charge it. There are no buttons on the CS ONE, just connect any lead-acid or lithium battery and simply charge. Polarity free clamps mean you don’t even need to worry about which clamp goes where, so you’ll never make a wrong connection again. The clamps are spark free too, so don’t worry if you accidentally touch them together Unlock additional features using the Bluetooth® enabled CTEK App. Select ‘RECOND’ to restore and recondition your battery. Choose ‘WAKE UP’ for lithium batteries with under voltage protection or to bring deeply discharged lead-acid batteries back to life. Select ‘SUPPLY’ to turn the CS ONE into a useful 12 V supply

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > Battery Chargers > CTEK, CS ONE Battery charger. EU wall plug

fits  With UK plug

8A 12V charger. For 3Ah to 180Ah lead-acid (AGM, GEL, EFB, MF, CaCa) and lithium batteries. The CS ONE has APTO (Adaptive Charging) technology to recognise the type of battery you want to charge and tells how long it will need to charge it. There are no buttons on the CS ONE, just connect any lead-acid or lithium battery and simply charge. Polarity free clamps mean you don’t even need to worry about which clamp goes where, so you’ll never make a wrong connection again. The clamps are spark free too, so don’t worry if you accidentally touch them together Unlock additional features using the Bluetooth® enabled CTEK App. Select ‘RECOND’ to restore and recondition your battery. Choose ‘WAKE UP’ for lithium batteries with under voltage protection or to bring deeply discharged lead-acid batteries back to life. Select ‘SUPPLY’ to turn the CS ONE into a useful 12 V supply

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > Battery Chargers > CTEK, CS ONE Battery charger. UK wall plug

fits  Universal

With EU wall plug. 10-step 12.8V/13.2V 6A battery saving charger-tester-maintainer. The ultimate LiFePO4 / LPF Lithium Iron Phosphate) professional level battery diagnostic & maintenance charger and tester for batteries from 3 to 72 Amp-hour. – 10 steps: 1 low volt start (0.5V); 2 Test before charge; 3 Temperature check; 4 Ultra low volt save; 5 cell monitoring; 6 Test cell damage; 7 cel-balancing charge; 8 Optimize; 9 Test after charge; 10 24-7 maintenance – Starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented – Indoor / Outdoor (lowest temperature: -40°F / -40°C) – Input 100-240V 50-60Hz, high efficiency (CEC listed) – Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector – Low Volt Start of 0.5V + 3 step low volt save & test – Includes weatherproof battery lead & battery clip set – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Lithium 4S 6A battery charger

fits  Universal

With EU wall plug. 8-step 12.8/13.2V 0.8A Battery saving charger-tester-maintainer. Used to charge LiFePO4 / LFP (Lithium Iron Phosphate) 4-series batteries with nominal voltage of 12.8V – 13.2V. – Saves low voltage LiFePO4 batteries – Specialized LiFePO4 charge cycle – Maintains & protects LiFePO4 batteries – Battery BMS reset. – Charging Amps: 0.8A – Indoor & Outdoor (lowest temperature: -4°F / -20°C). – Save: Low Volt Start of 0.5V + 3 step low volt save & test – For LiFePO4 (LFP) 4 series cell 12.8 / 13.2V batteries from 2 – 30Ah – Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed – Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead & standard battery clip set – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE Lithium battery charger

fits  Universal

With EU wall plug. 4-bank x 8-step 12.8/13.2V 0.8A Battery saving charger-tester-maintainer. Charges up to 4 x LiFePO4 / LFP (Lithium Iron Phosphate) 4-series batteries with nominal voltage of 12.8V – 13.2V. Each bank charges independently. – Saves low voltage LiFePO4 batteries – Specialized LiFePO4 charge cycle – Maintains & protects LiFePO4 batteries – Battery BMS (Battery Management System) reset – Charging Amps: 0.8A per bank – Indoor & Outdoor invironment (lowest temperature: -4°F / -20°C) – Save: Low Volt Start of 0.5V + 3 step low volt save & test – For LiFePO4 (LFP) 4 series cell 12.8 / 13.2V batteries from 2 – 30Ah – Input: Global (100-240V 50-60Hz), high efficiency (CEC listed), fully sealed – Weatherproof case with wall mounts – Incl. 6ft / 180cm AC supply lead and 4 x 6ft / 180cm charge lead ending in SAE connector. 4 x Weatherproof battery lead & 4 x standard battery clip set included – No risk of overcharging – Sparks suppressed – Safe for vehicle electronics – Safe for long-term battery maintenance – Automatic shut-down if short-circuited or battery disconnected

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop; Street

Home > Workshop > Battery Chargers > Tecmate OptiMATE, Lithium 4s 0.8A 4-bank