fits  2015-UP Road Glide (Excl. 2023 CVO Road Glide)

Your bottom tree clamp is an essential part of a performance front end setup. The Wolf One Bottom Clamp has been engineered and designed with a broader cross section offering increased axial strength over the stock Harley Tree. The increased surface area of our wide body fork clamps offer positive hold of your forks giving you peace of mind that your Triple Tree setup will absorb the abuse of hard use. The Wolf One Bottom Clamp is intended to be used with the Wolf One Top Clamp and allows you to remove your stock plastic Nacelle to have a clean, open look of an inverted front end. Fits Harley-Davidson Road Glides Only — Models 2015 and Up. Does not have fastener points to run a stock Nacelle or Batwing fairing. Includes a set of 30mm replacement bearings. Mounts directly to your stock 49mm forks. Works great with internal fork cartridge kits. Machined from high quality American made solid billet Aluminum. Available finishes include: Machine or Black Anodized.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Suspension > Triple Trees > Kraus, Wolf One billet Bagger bottom clamp. Black

fits  18-Up FXLRS , 22-Up FXLRST

Upgrade your Harley Softail’s front end with the Axis Softail Triple Trees from Kraus. These triple trees are engineered and designed with a broader cross section, offering increased axial strength compared to the stock Harley Softail Tree. The wide body fork clamps provide a positive hold on your stock forks, ensuring that your Triple Tree setup can handle rigorous use. These trees are an essential part of a performance front end setup and are the strongest available for the application. The kit includes a 1″ stem for a complete installation. Made from solid billet aluminum, these triple trees are machined with a proprietary geometry to improve the performance and handling of your bike.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Suspension > Triple Trees > Kraus, Axis Softail triple trees. Black anodized

fits  15-23 FLTR; 2024 FLTRK

Bolt-on 2″ (51mm) drop top triple tree, allow you to add aftermarket risers or T-bar handlebars to your Road Glide. It adds an additional 2″ of height to the front end but factory geometry is retained for handling. Machined from a massive billet block of 6061 aluminum for and cut for great looks in combination with a very strong and lightweight top tree The innovative ignition switch cover design allows you to decide whether to keep the factory ignition switch location or relocate for a full custom look. Comes complete with billet fork nut cover and mounting hardware. Note: 599450 Ness Method ignition switch cover kit is recommended (sold separately) when keeping factory ignition switch location and factory fork lock function. Be sure to check out 599416 Ness Method aluminum 10″ riser kit for a perfect style and lightweight match.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Arlen Ness, Method 2” (51mm) drop top tree. All black

fits  14-24 FLT/Touring with Öhlins 961994 or Öhlins 961993 inverted forks

Designed to be used with Öhlins 961994 (note) or 961993 (note) inverted forks only. When you have already updated your Bagger forks with a set of Öhlins 961994 or 961993 inverted forks, this is one more conversion upgrade that is to be considered. This Kraus KR8 Component Kit will replace the standard H-D triple trees with a high-end precision engineered high performance set-up that is CNC machined from solid 6061 billet aluminum. Bolt-on installation with all required installation hardware to run factory/stock wheels*, brakes* and bodywork. In combination with the Öhlins inverted forks your bike is converted to a great handling High Performance capable Sport Touring motorcycle. Note*: Compatible with 108mm radial brake fitment only. Note: The KR8 Front End Component Kit comes with a 25mm axle. If your bike has a 1″ (25.4mm) wheel axle you will need to convert the wheel bearings to 25mm. Note: Please contact Motorcycle Storehouse Tech Support before you add Öhlins 961994 or 961993 inverted fork to your order. Tech Support can advise you on correct spring set-up for a specific rider weight and mods, if required, for Bagger Racing applications.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Kraus, KR8 Component Kit, Touring. Black

fits  18-24 Softail

Black anodized aluminum. The Raptor Pullback Plate bolts to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5″ (3.8cm). It solid mounts to the stock or aftermarket triple trees and the risers solid mount to the Raptor Plate. Since the handlebars have no longer vibration insulating dampers Krause recommends the use of the Isolated Risers with built-in vibration damping. – Moves bar towards rider 1.5″ (3.8cm) – Adds 2.5″ of total height to the bar/riser – Improves bar position when using Motocross style bars – It is recommended running Kraus Isolated Risers with this setup for Vibration Damping – Black anodized CNC machined billet aluminum. Note: Total height may vary slightly depending on the bushing and/or bar type.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Kraus, raptor 38mm pullback plate. Black

fits  00-23 FLTR Road Glides; 2024 FLTRK Road Glide limited; 00-22 (NU) FLHR Road Kings

The Raptor Pull Back Plate is for Road Glides. Bolt it to your stock or aftermarket triple tree to relocate the bar mounts towards the rider 1.5″ so that you can mount any standard risers and they will clear the Gauges on 2014 & Up Road Glides.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Kraus, Raptor 1.5″ (38mm) Pullback Plate. Black

fits  00-25 FLT/Touring

The T-Rex handlebar pull back plate bolts to the top of the triple tree to relocate the bar mounts towards the rider 2.5″ (6.4cm) to improve the ride and to clear the Navigation screen and stereo so you can run straight risers or T-bars on Street Glides and Electra Glides and others with Batwing fairings. – The T-Rex Plate (body only) adds 1″ (2.54mm) of total height to the bar/riser – Will fit Road Glides with modifications Note: When running the Kraus T-Rex pullback plate you can not use your stock Key Switch/Steering Lock so you will need to relocate the switch or fully remove it with an optional CVO Ignition Flash done by your local HD dealer. Check with your local shop or dealership for options. Some bikes can be reprogrammed to not need the key switch at all. Note: When running Kraus Isolated Risers then this kit has everything you need to have the most solid and best-performing setup. Note: If you are NOT running Kraus Isolated Risers you will need a set of replacement bagger polyurethane bushings to install under your risers in the T-rex Plate. Note: 24-up models with contact stock nacelle. Will fit with Kraus top clamp / top triple tree.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Kraus, T-Rex 63.5mm Pullback Plate. Black

fits  40-57 45″ Solo and Servi-Cars (NU)

Chrome plated reproduction stem nut and dust shield for OEM style Springer forks. 7/8-24 threaded. Used with OEM style early ball bearings. OEM replacement reference 49335-40 (2754-40)

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Hardware > Colony, stem crown nut. Chrome

fits  18-19 FXBR Breakout 107; 18-22 FXBRS Breakout 114; 23-24 FXBR Breakout 117

Black zinc plated finish, for a lasting good look. Great for the finishing touch in a blacked-out Breakout. Kit includes two bolts for the upper and four bolts for the lower triple tree.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Hardware > Cult-Werk, triple tree bolts. Black

fits  88-94 FXR; 91-05 Dyna (Excl. FXDWG); 88-03 XL Sportster (Excl. 1200/S); 04-05 XL1200R (NU)

Chrome plated. On the inside of the cover is a 1/-4-20 threaded stud screw. Cover installs by screwing this stud into the OEM threaded fork stem bolt. Replacement for OEM 45668-90.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Triple Trees > Hardware > Colony, fork stem bolt cover FXR/FXD/XL. Chrome