fits  21-22 RA1250 Pan America

2″ lowering kit. Reaching the ground can be a challenge for some, with the higher seating position of off road models. This kit offers an easy way to lower your Pan America, without requiring permanent modifications, to make any on or off road ride much more enjoyable. Easy install, complete with installation instructions. – 50mm lower riding position – Easy install – No permanent mods required

Δείτε περισσότερα στον κατάλογο

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, Pan America rear lowering kit. 50mm

fits  21-22 RA1250 Pan America

1″ lowering kit. Reaching the ground can be a challenge for some, with the higher seating position of off road models. This kit offers an easy way to lower your Pan America, without requiring permanent modifications, to make any on or off road ride much more enjoyable. Easy install, complete with installation instructions. – 25mm lower riding position – Easy install – No permanent mods required

Δείτε περισσότερα στον κατάλογο

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, Pan America rear lowering kit. 25mm

fits  21-24 RH1250S Sportster S

Some think the Sportster S is perfect but if it could be lowered it would be even better. So, this Kodlin rear lowering kit lowers the Sportster S right into the cool zone with a noticeable 25mm (1″). – Made of steel and comes with a black powder coated finish – Installation will not require the use of a shock spring compression tool – Requires no modifications – Easy installation – Installation instructions are available online – This comes with approval Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, 25mm rear lowering kit. Black

fits  21-24 RH1250S Sportster S

Some think the Sportster S is perfect, just a little low when you’re a tall person. This Kodlin rear rise kit raises the Sportster S a noticeable 25mm (1″). – Made of steel with a black powder coated finish – Installation will not require the use of a shock spring compression tool – Requires no modifications – Easy installation – Installation instructions are available online – This comes with approval Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, 25mm rear rise / lift kit. Black

fits  18-24 Softail- with Pre-Load adjuster knob: 18-24 Softail: 18-21 FLHC Heritage Classic 107; 18-24 FLHCS Heritage Classic 114; 20-21 FXLRS Low Rider S 114; 22-24 FXLRS Low Rider S 117; 22-24 FXLRST Low Rider ST 117; 2022 FXRST Low Rider El Diablo 117; 18-19 FLDE Deluxe 107; 18-20 FXFB Fat Bob 107; 18-24 FXFBS Fat Bob 114; 18-20 FLFB Fat Boy 107; 18-24 FLFBS Fat Boy 114; 18-24 FLSB Sport Glide 107; 18-19 FXBR Breakout 107; 18-22 FXBRS Breakout 114; 23-24 FXBR Breakout 117

Used to lower the rear up to 40mm (1.5″), depending on standard model height. A great solution to easily reach the ground for shorter riders and, regardless of length, cool looks for all. Permanent modifications not required. – Lowers the bike up to 40 mm (1.5″) – Includes pre-installed new bearings – Includes installation instructions – Kit does not require to shorten the threaded rod – Requires the use of a M8 shock compression tool – This comes with approval Note: The shock spring must be compressed for installation for which a shock compression tool is required, like Kodlin 963489 or similar. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, rear lowering kit M8. With Pre-Load adjuster knob

fits  18-24 Softail- without Pre-Load adjuster knob: 2020 (NU) FLDE Deluxe 107 (use 951863 for 18-19 FLDE); 18-21 (NU) FLSL Slim 107; 18-20 (NU) FXBB Street Bob 107 (use 951863 for Lowrider S); 21-24 FXBBS Street Bob 114; 18-20 (NU) FXLR Low Rider 107; 20-24 FXST Softail Standard 107; 2024 FLI Hydra Glide Revival 114

Used to lower the rear up to 40mm (1.5″), depending on standard model height. A great solution to easily reach the ground for shorter riders and, regardless of length, cool looks for all. Permanent modifications not required. – Lowers the bike up to 40 mm (1.5″) – Includes pre-installed new bearings – Includes installation instructions – Kit does not require to shorten the threaded rod – Requires the use of a M8 shock compression tool – This comes with approval Note: The shock spring must be compressed for installation for which a shock compression tool is required, like Kodlin 963489 or similar. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, rear lowering kit M8. No Pre-Load adjuster knob

fits  18-24 Softail with 43mm short stroke shocks: 18-19 (NU) FLDE Deluxe 107; 20-21 (NU) FXLRS Low Rider S 114 18-20 (NU) FLFB Fat Boy 107; 18-24 FLFBS Fat Boy 114; 18-24 FLSB Sport Glide 107; 18-19 (NU) FXBR Breakout 107; 23-24 FXBR Breakout 117; 18-22 (NU) FXBRS Breakout 114; 2020 (NU) FLDE Deluxe 107; 18-21 (NU) FLSL Slim 107; 18-20 (NU) FXBB Street Bob 107; 21-24 FXBBS Street Bob 114; 18-20 (NU) FXLR Low Rider 107; 20-24 FXST Softail Standard 107; 2024 FLI Hydra Glide Revival 114;

25mm rear tail rise kit / lift kit for 43mm stroke (OEM 54000110, 54000112, 54000140) M8 shocks. The maximum lift without hitting the swingarm. Used to increase the rear height of your Softail by for better ground clearance and more agile handling since trail is reduced. Kit is made of high quality steel, includes pre-installed needle bearing and comes with a black powder coated finish. Installs without shock modifications. Installation instructions are available online. Note: Alternatively, the Kodlin 963492 15mm lift kit can also be used when less than 25mm rise is required. Note: A shock spring compressor, like Kodlin 963489 or simular, is required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Kodlin, M8 25mm rear lift / shock extension. Black

fits  00-17 Softail (NU)

Easily accessible and fully adjustable 40mm lowering kit. Allows adjustment from stock height to a maximum of 40mm lower, with lowering kit installedThis comes with approval. Note: For show use only, non-riding conditions, up to 80mm lowering is obtainable. Note: Also allows adding 30mm to stock suspension height. Note: Installation will require a press. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Müller, rear lowering kit Twin Cam

fits  18-24 Softail with preload adjuster knob: 18-21 (NU) FLHC Heritage Classic 107; 18-24 FLHCS Heritage Classic 114; 22-24 FXLRS Low Rider S 117; 22-24 FXLRST Low Rider ST 117; 2022 (NU) FXRST Low Rider El Diablo 117; 18-19 (NU) FLDE Deluxe 107; 20-21 (NU) FXLRS Low Rider S 114; 18-20 FXFB (NU) Fat Bob 107; 18-24 FXFBS Fat Bob 114; 18-20 (NU) FLFB Fat Boy 107; 18-24 FLFBS Fat Boy 114; 18-24 FLSB Sport Glide 107; 18-19 (NU) FXBR Breakout 107; 18-22 (NU) FXBRS Breakout 114; 23-24 FXBR Breakout 117; 19-20 (NU) FXDRS 114;

Fully adjustable 40mm lowering kit. Allows adjustment from stock height to a maximum of 40mm lower. Damper adjustments remain accessible in all cases. Includes pre-installed needle bearings. No damper rod shortening or other permanent modifications required. Installation requires the use of a spring compressor tool. Comes with approval. Note: See 591263 for a Mueller spring compressor tool to ease installation. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Müller, rear lowering kit M8

fits  89-99 Softail (NU)

Easily accessible and fully adjustable 40mm lowering kit. Includes installed bearings. Allows adjustment from stock height to a maximum of 40mm lowerThis comes with approval. Note: For show use only, non-riding conditions, up to 80mm lowering is obtainable. Note: Installation will require a press. Note: Check your local MCS dealer or the MCS sales department for exact type of approval and validity on bike model and years on the test report.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Müller, rear lowering kit Evo