fits  00-06 FLT/Touring (excl. 00-01 Touring with Magneti Marelli EFI); 01-03 Dyna; 04-06 XL Sportster (NU)

This will replace OEM TSM (Turn Signal Module) 68920-01, TSSM (Turn Signal Security Module) 68922-00 (for US models) or TSSM 68924-00 (for HDI/EU models). It will not replace the TSSM factory alarm features. Note: The replacement of the OEM TSSM factory alarm module 68922-00 & TSSM 68924-00 for models with EFI require the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included. – Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules – Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module) – Lighting Compatibility: Works with both LED and incandescent bulbs – Turn Signal Load Range: Supports 0.24A to 6A per side – No Load Equalizer Required: Compatible with BCM-compliant LED upgrades – Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure – Turn Signal Functions: Manual and self-canceling based on speed, time, and direction – Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage – Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second – Protection: Built-in short circuit and overcurrent protection on turn signal circuits – Power Efficiency: Designed for low current consumption – Voltage Range: Operates between 11VDC and 15VDC – Build Quality: Robust, high-quality components – Includes installation instructions. Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Custom Dynamics, turn signal module TSM-1

fits  01-06 Softail; 04-06 Dyna (NU)

This will replace OEM TSM (Turn Signal Module) 68921-01, TSSM (Turn Signal Security Module) 68923-00 (for US models) and TSSM 68925-00 (for HDI/EU models) It will not replace the TSSM factory alarm features. Note: This will replace OEM TSSM 68923-00 and TSSM 68925-00. Models It requires the use of a TechnoResearch diagnostic tool to complete the TSSM module replacement procedure. For some models a manual procedure to marry the module to the bike is possible, for all others the TechnoResearch diagnostic tool is required for TSSM module replacement. Installation instructions are included. – Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules – Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module) – Lighting Compatibility: Works with both LED and incandescent bulbs – Turn Signal Load Range: Supports 0.24A to 6A per side – No Load Equalizer Required: Compatible with BCM-compliant LED upgrades – Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure – Turn Signal Functions: Manual and self-canceling based on speed, time, and direction – Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage – Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second – Protection: Built-in short circuit and overcurrent protection on turn signal circuits – Power Efficiency: Designed for low current consumption – Voltage Range: Operates between 11VDC and 15VDC – Build Quality: Robust, high-quality components – Includes installation instructions. Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Custom Dynamics, Smart turn signal module TSM-2

fits  07-10 Softail; 07-11 Dyna; 07-17 V-Rod (NU)

This will replace OEM TSM (Turn Signal Module) 68921-07, HFSM (Hands Free Security Module) 68925-07 (for US & HDI/EU models) and HFSM 69976-08. Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included. – Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules – Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module) – Lighting Compatibility: Works with both LED and incandescent bulbs – Turn Signal Load Range: Supports 0.24A to 6A per side – No Load Equalizer Required: Compatible with BCM-compliant LED upgrades – Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure – Turn Signal Functions: Manual and self-canceling based on speed, time, and direction – Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage – Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second – Protection: Built-in short circuit and overcurrent protection on turn signal circuits – Power Efficiency: Designed for low current consumption – Voltage Range: Operates between 11VDC and 15VDC – Build Quality: Robust, high-quality components – Includes installation instructions. Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Custom Dynamics, Smart turn signal module TSM3

fits  07-13 FLT/Touring; 09-13 Trike; 07-13 XL Sportster (NU)

This will replace OEM TSM (Turn Signal Module) 68920-07 and HFSM (Hands Free Security Module) 68924-07 (for US & HDI/EU models). Integration with the OEM safety switches prevent starting in gear without the clutch pulled. It will not replace the HFSM factory alarm features. Installation instructions are included. – Direct Plug-and-play replacement for the OEM Harley-Davidson turn signal modules – Functionality: Operates solely as a TSM (Turn Signal Module) without and will not support functions/security features of the TSSM (Turn Signal Security Module) – Lighting Compatibility: Works with both LED and incandescent bulbs – Turn Signal Load Range: Supports 0.24A to 6A per side – No Load Equalizer Required: Compatible with BCM-compliant LED upgrades – Programming Compatibility: Follows OEM TSM manual password learning and supports TechnoResearch module replacement procedure – Turn Signal Functions: Manual and self-canceling based on speed, time, and direction – Four-Way Hazard Operation: Smart cancellation based on timing, ignition position, and battery voltage – Safety Feature: Auto shut-off when tilt exceeds 45° for more than 1 second – Protection: Built-in short circuit and overcurrent protection on turn signal circuits – Power Efficiency: Designed for low current consumption – Voltage Range: Operates between 11VDC and 15VDC – Build Quality: Robust, high-quality components – Includes installation instructions. Note: If you want to replace the seal for the stock H-D turn signal module connector, it is available as 709107.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Custom Dynamics, Smart turn signal module TSM-4

fits  01-10 Softail; 04-11 Dyna; 07-13 FLT/Touring; 09-13 Trike; 07-13 XL Sportster; 07-17 V-Rod (NU)

This heavy-duty silicone rubber seal is designed to replace the factory-installed seal on Harley-Davidson TSM (Turn Signal Module) and TSSM (Turn Signal Security Module) wire harness plug. When replacing the TSM, Custom Dynamics strongly recommends replacing the original seal to maintain a secure, watertight connection and protect the unit from moisture-related damage. Used on both OEM and Custom Dynamics 709103, 709104, 709105 and 709106 TSM (turn signal modules)

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Custom Dynamics, Replacement Seal for TSM/TSSM Connector

fits  04-13 XL; 01-11 Dyna; 01-10 Softail; 01-13 Touring (NU)

22-Second Self-Canceling Turn Signal Adapter Module for use in combination with the OEM TSM or TSSM module. This module replaces the OEM turn signal flashing functions but leaves the bank angle sensor and serial data connection intact. No need for a new ECM! Note: If the OEM TSM/TSSM prevents the bike from starting, this module will NOT work to fix this issue, a new ECM is needed.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Badlands, Self-Canceling turn signal adapter module

fits  Universal 5-9V

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems. – Electronic universal solution for motorcycle lights such as indicators, tail/brake light and position light – Compatible with classic bikes, new models and modern operating systems – Correct flashing frequency – No error messages in the cockpit – No disruptive quiescent currents – Installation of indicators with higher power consumption [watts] than original – Installation of indicators with lower power consumption [watts] than original – Installation of indicators with higher voltage [Volt] than original – Installation on motorcycles with minus-switched indicators – Installation on motorcycles with current-controlled indicators

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Kellerman, i.Nex Equalizer.8V

fits 

Digital 50-step adjustable load equalizer. It is simply connected to the turn signals. The load is 50-step variable by touching the ‘programming cable’ to ground (less load) or to positive +12V (more load), after which it is automatically saved. This will make this set-up compatible with any requirement of the bike to prevent the ECU triggering trouble codes or any issue with the OEM turn signal relay. – Dimensions: 56 mm x 37 mm x 17 mm – Body material: ABS waterproof molded – Input voltage range: 7 – 18 Volt – Connections: Inputs 0,14 mm², Outputs 0,75 qmm – Output power range: Between 2 x 1 Watt and 2 x 15 Watt – Maximum ambience temperature: 80 degree Celsius. Note: This module should be used with turn signals that pull a maximum of 10W total. Note: The Vari Load can also be used as a tool in the workshop. You can adjust to required load value with the Vari Load on a customer’s bike. Then you will then know what resistor to use for that specific application. A printed table with resistors is listed the manual.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > Axel Joost Elektronik, ‘Vari Load’ adjustable load equalizer

fits  Universal

Used when converting from regular incandescent bulbs to LED turn signals to correct flash rate. – 10W / 3 Ohm resistance – Comes with 2 resistors

Δείτε περισσότερα στον κατάλογο V-Twin; Street

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > KOSO, 12V LED load equalizer set for turn signals

fits  Universal

Universal relay. 1 to 80W. With ‘defect detection’, which will rise the flash rate of the intact turn signal. Can be used with LED or a combination LED and ‘regular’ incandescent bulbs. – For LED or LED & incandescent bulbs – Voltage: 12V – Load range: 1W to 80W – Connections: 49 P = battery input, (12V +) 31G = ground (-), (GND) 49a L = light (for indicator switch) – Connections on the relay: Black to P (power supply 49) brown (49a) L (signal) green to 31(-) (GND) – For vehicles with 3 pins and 2 Pin-occupancy (49, 49a): Green (separately) to GND (31) and to ground – For vehicles with 3-pins and 3-pin connectors (49, 49a, 31): Use green (adapter plug) – Dimensions: diameter: 37 mm height: 25 mm – Includes: 1 x relay, 1 x ground cable, 1 x adapter cable Honda/Kawasaki/Yamaha, 1 x rubber mount

Δείτε περισσότερα στον κατάλογο V-Twin; Street

Home > Parts > Lights > Turn Signals > Turn Signals Flashers & Load Equalizers > KOSO, digital 12V turn signal flasher relay