fits  18-25 Softail; 17-25 FLT/Touring; 17-25 Trikes

Direct replacement for the stock head bolts and cylinder studs. Quality is much higher and recommended for performance builds. Complete kit. Head bolts: – Black oxide coated – Heat treated 8640 steel – 200.000 psi ultimate tensile strength – 9/16″ 12 point head with integral washer – Formed threads – Cold formed head – Re-usable cylinder studs – 4140 Chrome Moly – Oil quenched and tempered to 39-44 HRC – 180,000psi Tensile Strength – Rounded thread roots, rather than flat, improving fatigue strength – Positive stop shoulder allows for consistent installed height

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > S&S. M8 head bolt & stud kit

fits  84-99 Evo Big Twin; 86-03 XL Sportster. With S&S 4″ bore cylinders

.043″ thick aramid reinforced graphite.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > S&S, cylinder head gaskets. 4.00″ bore .043″

fits  Aprilia: 05-09 PEGASO STRADA / FUN / FACTORY / TRAIL 660cc Yamaha: 06-09 MT-03 660cc; 04-11 XT R / X 660cc; 08-12 XTZ TENERE 660cc

The Athena top end gasket kits include all necessary gaskets to rebuild the top end of the engine from the base gasket up. Kit includes all rubber gaskets, such as valve cover gaskets, o-rings and valve stem seal. High temperature blue silicon beading on most critical flat gaskets.

Δείτε περισσότερα στον κατάλογο Street

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Athena, top end gasket kit

fits  Aprilia: 95-99 MOTO 6.5 650cc; 91-00 PEGASO 650cc

Thickness same as OE. Good quality raw materials are being used to produce this gasket, using inline laser cutting and multi-stage stamping technology.

Δείτε περισσότερα στον κατάλογο Street

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Athena, Cylinder base gasket

fits  Aprilia: 95-99 MOTO 6.5 650cc; 91-00 PEGASO 650cc; 01-04 PEGASO I.E 650cc

Thickness same as OE. Good quality raw materials are being used to produce this gasket, using inline laser cutting and multi-stage stamping technology.

Δείτε περισσότερα στον κατάλογο Street

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Athena, Cylinder head gasket

fits  18-24 Softail; 17-24 FLT/Touring, Trikes. With custom engines

.036″ MLS (Multi Layer Steel). Gasket bore is 4.205″. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Cometic, cylinder head gasket set. .036″ MLS 4.185″ bore

fits  18-24 Softail; 17-24 FLT/Touring, Trikes. With 4.200″ bore cylinders

.040″ MLS (Multi Layer Steel). Gasket bore is 4.220″. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Cometic, cylinder head gasket set. .040″ MLS 4.200″ bore

fits  18-24 Softail; 17-24 FLT/Touring, Trikes. With 4.200″ bore cylinders

.030″ MLS (Multi Layer Steel). Gasket bore is 4.220″. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Cometic, cylinder head gasket set. .030″ MLS 4.200″ bore

fits  18-24 Softail; 17-24 FLT/Touring, Trikes. With 4.250″ big bore cylinders

.040″ MLS (multi-Layer-Steel). For water & oil cooled bikes. Special design allows the gasket to fit into the cylinder bore embossement… while even keeping the oil cooling port open on oil cooled heads. With this gasket the 4.250″ big bore size is a true bolt-on application for both oil & water cooled M8 models. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Cometic, cylinder head gasket set. .030″ MLS 4.250″ bore

fits  18-24 Softail; 17-24 FLT/Touring, Trikes. With custom engines

.030″ MLS (Multi Layer Steel). Gasket bore is 4.205″. MLS (Multi Layer Steel) explained: MLS consists of a top and bottom layer of embossed stainless steel with both side coated with 250°C high temperature polymer rubber layer. The inner ring(s) are also stainless steel. The gasket layers are rivited together, outside the gasket surface, for ease of installation. The outer layers are embossed and both sides coated with a 250°C resitant polymer rubber layer. MLS head gaskets eliminate the use of any dowel pin o-rings.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gaskets > Gasket Kits > Cylinder Heads > Cometic, cylinder head gasket set. .030″ MLS 4.185″ bore