fits  Indian: 19-21 FTR 1200; 19-20 FTR 1200 S; 21-24 FTR S; 21-24 FTR Rally; 21-24 FTR R Carbon; 22-24 FTR; 2023 FTR Championship Edition

This Racing (no cat) 60mm mid-pipe is optionally available to replace the stock mid-pipe (with catalytic converter) and give the bike its full power. Not street legal, for racing use only. Note: It is required to remap the stock ECE or a free programmable EC must be installed to correct fuel/air ratio. This is not available from Motorcycle Storehouse.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 2 > V Performance, Racing Mid-Pipe. Without catalytic converter

fits  18-24 FLT/Touring models

Non-homologated racing part, without catalyst. Raw stainless steel header pipe kit, without catalyst. Precision one-piece TIG-welded construction for a positive no-leak installation for optimum O2 functioning in all RPM’s. Comes with a O2 sensor connection on both front & rear head pipe. On the rear section/balance pipe, designed to perfectly balance the left & right muffler, a 3rd O2 sensor connection is available to install the 3rd (downstream) O2 sensor as in use with EU Euro5+ H-D models. Compatible with stock/aftermarket mufflers and stock heat shields, under which this head pipe set is, like stock, not visible. Note: These header pipes do not have a catalyst so it belongs to the ‘racing category’ and is not street legal.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > V Performance, ‘Racing’ head pipe set. No cat

fits  17-24 Touring, CVO

Note: Special Order Product only. To order please contact your MCS sales representative. Handcrafted from titanium. For racing use, without catalyst. Not approved for road use.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Zard, Decat Racing 2-1 head pipes. Titanium

fits  17-24 Touring, CVO

Note: Special Order Product only. To order please contact your MCS sales representative. Handcrafted from AISI 304 stainless steel. For racing use, without catalyst. Not approved for road use.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Zard, Decat Racing 2-1 head pipes. Stainless Steel

fits  Universal

Used to build into a custom made exhaust system. Will increase torque by preventing exhaust waves entering the combustion chamber for a more positive cylinder fill. Stainless FEULING AR (Anti-Reversion) Chamber, Inlet 1.750″, exit 1.875″, 3.250″ OAL Over All Length. Brushed finish. Includes Feuling AR badge. For use with a custom made exhaust, chambers must be fabricated into a system. Sold Each. AR Chambers. (Patent # US 4206600 A & 6336471 B1): Our patented Anti-Reversion technology transferred from our performance automotive development dating back to the 70’s. Designed to increase power, throttle response and fuel economy as well as reduce carbon deposits and cylinder temperatures. This is achieved by the overlapping bulb chamber inside that traps negative exhaust waves carrying heat and spent gases. By blocking these waves we also reduce exhaust gas from re-entering the combustion chamber, allowing for a more positive intake charge and crisper throttle response. This will also allow for a leaner tune increasing fuel economy. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Feuling, AR (Anti-Reversion) chamber

fits  Universal

2″ (51.1mm) stainless steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22″ (56cm) long and has 18″ (46cm) of ripple.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Bare Knuckle Performance, Ripple exhaust pipe. 2″ SS

fits  Universal

1-3/4 (44.5mm) mild steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22″ (56cm) long and has 18″ (46cm) of ripple.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Bare Knuckle Performance, Ripple exhaust pipe. 1-3/4″ mild

fits  Universal

1-3/4 (44.5mm) stainless steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22″ (56cm) long and has 18″ (46cm) of ripple.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Bare Knuckle Performance, Ripple exhaust pipe. 1-3/4″ SS

fits  Universal

2″ (51.1mm) mild steel. This is a traditional style Ripple exhaust pipe section. Great to modify / customize your current exhaust system or use it while creating a one-off system. Section is about 22″ (56cm) long and has 18″ (46cm) of ripple.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Bare Knuckle Performance, Ripple exhaust pipe. 2″ mild

fits  17-25 FLT/Touring

Racing system. This Kodlin 2 into 2 head pipe system is made by Zard. Like Zard’s own systems, this Kodlin special is made from AISI 304 stainless steel with visible TIG/WIG welds. Manufactured using high end 2D/3D lasers, robots, bending machines and skilled qualified welders for a perfect result. – Compatible with stock or aftermarket mufflers – Compatible with stock to high performance motors – Clear stainless works finish – With a riveted ‘Kodlin powered by Zard’ plate – Fits with OEM floorboards or Ness Mid Controls for Touring models.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Headpipes > 2 into 2 > Kodlin, Performance 2-2 headers. Stainless steel