fits  18-24 Softail; 17-24 FLT/Touring (excl. Trikes)

Without balancer gear. With full wristpin width connecting rods for use with S&S pistons. Comes fully assembled with flywheels, connecting rods, connecting rod bearings, pinion and sprocket shaft. Note: Required for installation of 923194 / 923193 131″ (4.250″ bore) and S&S 994438/994437 136″ (4.320″ bore) big bore cylinder and piston kits. Note: Balancer gear is not included. See 923271 for identical flywheel assembly with balancer gear installed.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, M8 4-5/8″ stroker flywheel assembly

fits  32-73 45″ SV (NU)

2 used

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > Lockwasher,pinion/sprocket shaft

fits  39-73 45″ SV (NU)

Oil slinger

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > Sprocket bearing end, left side

fits  99-06 Twin Cam (Excl. 2006 Dyna) (NU)

106″ stroker engine. Balanced to 1108 grams total piston weight. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: Following is regarding 03-17 models. S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications. Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution. It is possible to use the stock weak 03-17 sprocket shaft bearing kit (OEM H-D 24004-03B) with S&S flywheels in 03-17 stock cases. However, S&S feels this roller bearing will not take the side loads produced in a high performance motor. S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used. To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available. This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor. Bearing inserts only are available as 978519, bearings only as 508960. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, 99-06 4-1/2″ stroke flywheel assembly

fits  99-06 Twin Cam (Excl. 2006 Dyna) (NU)

Standard 4″ stroke. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: Following is regarding 03-17 models. S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications. Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution. It is possible to use the stock weak 03-17 sprocket shaft bearing kit (OEM H-D 24004-03B) with S&S flywheels in 03-17 stock cases. However, S&S feels this roller bearing will not take the side loads produced in a high performance motor. S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used. To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available. This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor. Bearing inserts only are available as 978519, bearings only as 508960. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, 99-06 4″ stroke flywheel assembly

fits  99-06 Twin Cam (excl. 2006 Dyna); Stock replacement for S&S T124/T116 engines

4-5/8″ stroke with 8-1/2″ diameter flywheels. Balanced to 1035 grams total piston weight. Stock replacement for S&S engines, custom for OEM engines. No hassle in rebuilding or getting the right parts, it’s all here in one package. These are exactly set-up like the flywheels used in current S&S production engines. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: Following is regarding 03-17 models. S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications. Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution. It is possible to use the stock weak 03-17 sprocket shaft bearing kit (OEM H-D 24004-03B) with S&S flywheels in 03-17 stock cases. However, S&S feels this roller bearing will not take the side loads produced in a high performance motor. S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used. To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available. This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor. Bearing inserts only are available as 978519, bearings only as 508960. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, flywheel assembly for 124″ T-series 4-1/8″ bore engines

fits  00-06 88″ Softail (NU)

Stock stroke for 88″ engines. S&S conrods do not have tapered wristpin ends and are not compatible with stock H-D pistons or stock H-D sprocket shaft bearings. Balanced to 1230 grams total piston weight. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: Following is regarding 03-17 models. S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications. Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution. It is possible to use the stock weak 03-17 sprocket shaft bearing kit (OEM H-D 24004-03B) with S&S flywheels in 03-17 stock cases. However, S&S feels this roller bearing will not take the side loads produced in a high performance motor. S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used. To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available. This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor. Bearing inserts only are available as 978519, bearings only as 508960. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, 00-06 Softail 4″ stroke flywheel assembly

fits  00-06 Softail (NU)

For 116/124 S&S engines. S&S conrods do not have tapered wristpin ends and are not compatible with stock H-D pistons or stock H-D sprocket shaft bearings. Balanced to 1035 grams total piston weight. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: Following is regarding 03-17 models. S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications. Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution. It is possible to use the stock weak 03-17 sprocket shaft bearing kit (OEM H-D 24004-03B) with S&S flywheels in 03-17 stock cases. However, S&S feels this roller bearing will not take the side loads produced in a high performance motor. S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used. To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available. This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor. Bearing inserts only are available as 978519, bearings only as 508960. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, 00-06 Softail 4-5/8″ stroke flywheel assembly

fits  06-17 Dyna; 07-16 FLT/Touring. With OEM 96″, 103″or 110 pistons & OEM sprocket shaft bearing (NU)

OEM compatible. Stock 96″, 103″, 110″ stroke is 4-3/8″. These S&S conrods have a (non Timken®) pressed-on sprocket shaft roller bearing race for use with the stock 24004-03B sprocket shaft bearing, a weaker solution but compatible with OEM components. Complete with tapered wrist pin ends that are compatible with stock H-D pistons. Balanced to 1035 grams total piston weight, which is compatible with OEM. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, 06-17 4-3/8″ stroke flywheel assembly. For OEM

fits  06-17 Dyna; 07-16 FLT/Touring (NU)

For 111″ engines. S&S conrods do not have tapered wristpin ends and are not compatible with stock H-D pistons or stock H-D sprocket shaft bearings. Balanced to 1035 grams total piston weight. Note: Engines with strokes exceeding 4″ may require S&S piston oiling jets and piston to jet clearance notches in the piston skirt to avoid contact. Note: S&S crankpins allow the use of replaceable bearing races in the lower end of the connecting rods. The first generation of S&S crankpins, in use up to 2012, were 1.500″ diameter. The second generation crankpins, in use since 2013, have the larger 1.671″ OEM diameter crankpins. Now S&S & OEM crankpins are identical in diameter so now S&S parts can be used to rebuild stock H-D flywheels, something that previously was not possible since H-D rebuild parts were, and are, not available. Note: Following is regarding 03-17 models. S&S has designed these flywheels to work with a Timken style sprocket shaft bearing, they will fit stock 99-02 model year and all S&S cases without modifications. Stock H-D 03-17 Twin Cam engines use the same sprocket shaft roller bearing as is used on the pinion shaft, a cost saving but weaker solution. It is possible to use the stock weak 03-17 sprocket shaft bearing kit (OEM H-D 24004-03B) with S&S flywheels in 03-17 stock cases. However, S&S feels this roller bearing will not take the side loads produced in a high performance motor. S&S will not honor any warranty claims in an application where the OEM 24004-03B/24605-07 03-17 sprocket shaft roller bearing style bearing assembly is used. To upgrade to the pre-2003 style sprocket shaft bearing MCS 978517 JIMS conversion tool kit is available. This kit includes a tool, a Timken bearing and a steel crankcase bearing insert for one motor. Bearing inserts only are available as 978519, bearings only as 508960. Note: In any and all applications the technician must be able to judge components for their suitability in combination with the other engine components, prior to installation. It is of importance that a knowledgeable mechanic will install & make adjustments as required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Flywheel Assemblies > S&S, 06-17 4-1/8″ stroke flywheel assembly