fits 

Banjo bolt, M10 x 1.25 threaded, with incorporated hydraulic brake light switch with wiring. High polished stainless steel. 30mm under hex

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Switches > Brake Light Switches > Goodridge, M10 x 1.25 double banjo brake switch. SS

fits  Universal

Multiple function handlebar switch relay that will allow you to switch not just one function, like a regular relay, but virtually all functions that are found on a motorcycle. With installed wires for each function. – Input Current: up to 12V/20A – Input line fuse protected – CE approved – With individual cables for following functions: Headlight HI/LOW, Horn, Start, Turn signal left, Turn signal right, Hazard lights – 4 additional connections & functions – Each function is short-circuit protected – Dimensions 75mm x 30mm x 20mm Note: Perfect to combine with one or two of Daytona’s 701156 black/chrome or 701154 black/black 3-button handlebar switch(es) to control it all.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Switches > Relays > Daytona, multifunctional handlebar switch relay EZ

fits 

High polished stainless steel hose end to hose end. With male 3/8-24 an-3 on both sides. On top threaded to fit 1/8″ NPT threaded hydraulic brake switch

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Switches > Brake Light Switches > Goodridge, universal brake switch fitting. 1/8 NPT. SS

fits 

Optional brake light switch for Brembo’s 996202 and 997951 15 RCS / 19 RCS handlebar brake master cylinder.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Switches > Brake Light Switches > Brembo, brake light switch for 15/19 RCS master cylinders

fits  Universal 12V

Used to install motorcycle lights as turn signals, tail/brake lights and position lights. Offers an electronic universal installation solution. Compatible with all motorcycles, from classics to bikes equipped with the latest operating systems. – Allows installation of 4 turn signals, taillight, brake light & position lights on 12V bikes – Corrects flashing frequency – Does not trigger error codes or warning lights – No disturbing fluctuating currents – For installation of flashers with lower or higher power consumption (Watt) than OEM – For installation of indicators with higher voltage (Volt) than OEM since, on some bikes with a 12 volt system, the indicators are controlled with a lower (like 6V) voltage – Allows installation of minus-switched turn signals – Rotary switches allow required flashing frequency settings Note: See 710413 for i.NEX-AddOn for use on Indian motorcycles

Δείτε περισσότερα στον κατάλογο Indian

Home > Parts > Electrical > Switches > Other > Kellerman, i.Nex – V12, equalizer

fits  Universal

Universal ON-OFF switch, complete with relay. Will switch anything that needs to be switched, like handlebar heaters, fog lights etc. Perfect solution for a prominently shown, or hidden, custom switch on just about any custom or stock bike. Complete with aluminum mount bracket and rear cover. Complete with pre-installed wiring. – Cable length approximately 1m long x 4.9mm OD – Mount hole is 6.5mm for 6mm or 1/4″ bolts – IP67 water/dust proof rating. Note: Late model H-D with CAN-bus wiring, like 11-up Softail; 12-17 Dyna; 14-up Touring; 14-22 XL Sportster, will additionally require OEM 72673-11 electrical Y-harness connection kit which plugs into the data port (OBD / On Board Diagnostics plug) to provide a 12 volt lead.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Riverside, handlebar ON-OFF switch kit

fits  ABS sensor: 14-22 FLHR; 14-19 FLHRC; 17-24 FLHRXS; 19-24 FLRT Trike. Speedometer sensor: 20-22 FLHR; 20-24 FLHRXS; 20-24 FLRT Trike.

Replacement OEM style ABS brake sensor / wheel speed sensor pick-up for the ABS system. Also speedometer sensor for 20-up models. OEM replacement reference 32700017

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Other > ABS brake sensor & speedometer sensor. Front

fits  12-17 Dyna (NU)

Replacement OEM style ABS brake sensor / wheel speed sensor for the ABS system. OEM replacement reference 41100001.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Other > Abs brake sensor, rear

fits  Front ABS and speedometer sensor: 14-22 (NU) XL Sportster; 15-20 (NU) XG500/750; 21-24 (NU) RA1250 Pan America; 2025 RA1250ST Pan America Special ST; 21-25 RA1250S Pan America Special; 21-25 RH1250S Sportster S; 22-25 RH975 Nightster; 23-25 RH975S Nightster Special. Rear ABS sensor: 14-22 (NU) XL; 15-20 XG500/750; 21-24 (NU) RA1250 Pan America; 2025 RA1250ST Pan America Special ST; 21-25 RA1250S Pan America Special; 21-25 RH1250S Sportster S; 22-25 RH975 Nightster; 23-25 RH975S Nightster Special.

Replacement OEM style ABS brake sensor / wheel speed sensor for the ABS system for front & rear wheel. Also speedometer sensor for front wheel. OEM replacement reference 41100024

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Other > ABS brake sensor & speedometer sensor. Front / rear

fits  Dyna: 12-17 FXD/C/B/BB/BC/BP/L/LS

Replacement OEM style ABS brake sensor / wheel speed sensor for the ABS system. OEM replacement reference 40680-12

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Other > Abs brake sensor, front