fits  BMW K models

The Lunchbox Adapter allows the connection of several new speedos on the old harness connector what was connected to the old BMW speedo in older K models. The adapter makes the conversion of the old harness signals to a modern speedo easy. 10 output cables provide all necessary signals. The neutral signal is now compatible with modern speedos and the virtual load for the alternator is built-in. Fuel reserve signal for upto 1985 models is integrated. – Dimensions: 51 mm length x 51 mm wide x 15 mm height w/o connectors – Body material: Shock resistant ABS plastic, waterproof poured raisin – Case Color: Black – Connections: 0,14 qmm, 20 cm to the new speedo, 2 x 12 pin to original harness – Maximum ambient temperature: 80 degree Celsius – Input voltage range: 7 – 18 Volt

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Control Units > Axel Joost Elektronik, BMW K ‘Lunchbox Adapter’

fits  BMW K models

This module is used to simplify removal of the standard “lunchbox” speedometer instrument and its original bulky harness. The Lunchbox Remover module has an integrated neutral switch control with an output for the starter relay and the neutral indicator LED. A virtual load resistor for the charging system is built-in and the signal from the speed sensor is boosted from 0.2 Volt to 8 Volt to for compatibility with most aftermarket speedometers for your bike. – Dimensions: 41 mm length x 26 mm wide x 12,5 mm height – Body material: Shock resistant ABS plastic, waterproof poured raisin – Case color: Black – Connections: 0.14 qmm, 20 cm – Maximum ambient temperature: 80 degree Celsius – Input voltage range: 7 – 18 Volt

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Control Units > Axel Joost Elektronik, BMW K ‘Lunchbox Remover’

fits  BMW K models

Module used to convert any BMW K model, without gear indicator, to a modern speedometer with gear indicator. Works with the 3 transmission switches of the K models and has 6 outputs for neutral indication and the 5 speeds. The green cable allow to invert the output signals and allows a connection to a wide range of speedometers. Alternatively you can also connect 6 LEDs to the outputs as gear indicator when your custom speedo has no gear indicator. – Dimensions: 41 mm length x 26 mm wide x 12,5 mm height – Body material: Shock resistant ABS plastic, waterproof poured raisin – Case color: Black – Connections: 0.14 qmm, 20 cm – Maximum ambient temperature: 80 degree Celsius – Input voltage range: 7 – 18 Volt

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Control Units > Axel Joost Elektronik, BMW K ‘Speedo Adapter’

fits  BMW K models

Used to provide a neutral gear indication on any new speedometer. The K Neutral uses the 3 gear switches found on BMW K motorcycles. The module has with a power output for both the neutral indicator LED and the starter relay. It therefore also allows using the starter relay (start the bike) without the need to pull the clutch. – Dimensions: 38 mm length x 16 mm wide x 11 mm height – Body material: shock resistant ABS plastic, waterproof poured raisin – Power consumption: approx. 20 mA – Case Color: Black – Connections: 0.14 qmm and 0,5 qmm, 20 cm – Maximum ambient temperature: 80 degree Celsius – Input voltage range: 6 – 18 Volt

Δείτε περισσότερα στον κατάλογο

Home > Parts > Electrical > Control Units > Axel Joost Elektronik, BMW K Neutral