fits  48-64 Panhead (NU)

S-pipe 1-3/4″ diameter, straight cut end. Without baffles. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Extra short, for mounting mufflers withut cutting. Rigid frame, kickstart only. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Full Systems > 2 into 2 > Paughco, Shotgun drags. Short

fits  36-47 Knuckle (NU)

Chrome. S-pipe. Rigid frame. For use with universal mufflers. No slider channels. Use 512595 P-clamp to mount. Heatshield rear 903403. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Headpipes > 2 into 2 > Paughco, Dual shotgun head pipes. Chrome

fits  48-64 Panhead (NU)

S-pipe. Stock 1-3/4″ diameter crossover headpipes that are not connected to each other. Re-use stock hardware. Incl. Paughco 725Q clamp. Kickstart. Heatshield rear 903562, right rear snail 903567. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available. KICKSTART ONLY; S-PIPE; INCL MOUNT BRACKET

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Headpipes > 2 into 2 > Paughco, Independent dual head pipes. Chrome

fits  48-64 Panhead (NU)

1-3/4″ diameter. S-pipe, 4-piece system. Swingarm & rigid frames. Kickstart, mousetrap ok. 4-piece. Incl. Paughco 725E1 mount bracket. Heatshield crossover 903572, rear 903656. Note: The S-pipe system is a 2-piece front header, like OEM, which is flattened to fit between generator and frame tube for improved ground clearance in right turns. Note: Heatshields must be ordered separately when required. When heatshields are not mentioned they are not available.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Headpipes > Crossover Duals > Paughco, Crossover head pipes. Chrome

fits  84-99 Softail (NU)

Chrome. 1 3/4″ diameter, slash cut end. With high mounted rear pipe. Also good solution to use as head pipes on which mufflers can be mounted. Slider channel on front pipe. Incl. Paughco 731SB10 mounting bracket. Note: heatshields are not mentioned are not available.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Full Systems > 2 into 2 > Paughco, Shotgun drags (40″). Chrome

fits  84-99 Softail; 85-86 FX (NU)

Standard 1 3/4″ diameter, slash cut end. Without baffles. Also a good solution to use as head pipes on which mufflers can be mounted. Use 500191 Softail hanger bracket. Heatshield front 902387, rear 903499. Note: Heatshields must be ordered separately when required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Full Systems > 2 into 2 > Paughco, Drag pipes (40″). Chrome

fits  84-99 Softail (NU)

Mounts to stock bracket up to 1994. Incl. include Paughco 718H10 and 718I1 mounting brackets to simplify installation. Heatshield front 902387, rear 903497

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Full Systems > 2 into 2 > Paughco, Shotgun Tapered exhaust (38″). Chrome