fits  41-E84 Big Twin (NU)

With adjustable clutch hub retainer. Complete as shown. The full length Big Fix rollers increase clutch basket stability. especially with 3″ open drives. The use of the stock clutch bearing retainer is no longer required. Comes with e-clip retaining rings, allowing clutch hub adjustments by using the 3-different depths in the counterbored nylon retainer.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > Hubs > Long roller and bearing kit

fits  41-E84 Big Twin (NU)

Includes two seals, to be used behind each other for maximum sealing, a clutch hub nut lock washer and the clutch hub key. OEM replacement reference 12014 seal, 37503-41 (2471-41) lock washer, 37523-15A (2470-15) key

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > James, clutch hub nu seal kit

fits  41-E84 Big Twin (NU)

Used to connect inner clutch hub with outer clutch basket when installing or removing clutch hub nut.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > General Tools > Specific Tools > Clutch > Barnett, clutch shell lock tool

fits  41-E84 Big Twin (NU)

Complete kit, as shown. With special 5-stud design (3-stud is standard). Includes 37550-41B (2472-41) style clutch hub assembly with 5x studs 37583-41 and 5x pin 37585-41. Further includes 37566-58 retainer clutch hub rollers, 9540A clutch hub rollers, 37576-41 bearing retainer plate, 37574-44 springs bearing retainer plate, 38010-41 pressure plate, 37581-47, 37581-47 nuts clutch hub studs. The included 37549-41 clutch hub liner and 8227 brass rivets are pre-installed.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > Hubs > Clutch hub assembly, 5 stud

fits  41-E84 Big Twin (NU)

Custom 10-stud version of the OEM 3-stud style (37550-41B / 2472-41). Will install and work like stock. Includes clutch hub assembly with 10x studs 37583-41 and none of the otherwise shorter 37585-41 pins. The included 37549-41 clutch hub liner and 8227 brass rivets are pre-installed. Note: In some cases the the clutch hub liner and brass rivets may not be included.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > Hubs > Clutch hub, 10-stud

fits  41-E84 Big Twin (NU)

Comes with 10 holes, so compatible with all 3, 5 and 10 stud clutch hubs

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > Pressure Plates > Clutch pressure plate, aluminum

fits  41-E84 Big Twin (NU)

Replacement clutch hub (main shaft) nut. OEM replacement reference 37496-65

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > Hubs > Nut, clutch hub

fits  41-E84 Big Twin (NU)

Custom 5-stud version of the OEM 3-stud style (37550-41B / 2472-41). Will install and work like stock. Includes clutch hub assembly with 5x studs 37583-41 and 5x pin 37585-41. The included 37549-41 clutch hub liner and 8227 brass rivets are pre-installed. Note: In some cases the the clutch hub liner and brass rivets may not be included.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Clutch > Hubs > Clutch hub, 5-stud

fits  41-E84 Big Twin (NU)

Designed to withstand operating temperatures of over 600 degrees F. (318 °C). Very ‘sticky’ to help prevent fly off.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Oils & Chemicals > Grease > BDL, clutch hub bearing roller grease