fits  18-24 Softail

For passenger

Δείτε περισσότερα στον κατάλογο

Home > Parts > Chassis & Frames > Frame Accessories > Engine Guards & Crash Bars > HeinzBikes, limited edition clubstyle crashbar. Bronze

fits  18-24 Softail

Euro 4 and 5 homologated Kodlin 2 into system made by Zard. Exhaust flanges only are mounted to the heads. The headers are pushed into the exhaust flanges and are held in place with springs, same with the mufflers. Offers super easy and quick exhaust removal during engine or transmission maintenance. Like Zard’s own systems, this Kodlin special is made from titanium with visible MIG welds. Manufactured using high end 2D/3D lasers, robots, bending machines and skilled qualified welders for a perfect result. Comes with a plain titanium works finish and a powerful sound. – Compatible with stock to high performance motors – Clear titanium works finish – With a riveted ‘Kodlin powered by Zard’ plate – 3 lambda sensor connections (2 large for wideband sensors for tuning, incl. adapter for OEM sensors) Note: Fat Boy and Breakout models additionally require 994435 mounting bracket, which is optional available. Note: This is a EU homologated slip-on exhaust system. Removing or modifying the Db killer on homologated mufflers will void the warranty and the homologation. Certification is valid for unmodified stock bikes, for the specific models and model years as mentioned in the product descriptions (Directive 97/24/CE, EU regulation 134/2014). The approval number, shown on the supplied relevant certificate, is stamped on the muffler and it must be presented to law enforcement when checked.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Full Systems > 2 into 1 > Kodlin, Next Level 2-1 exhaust system. Titanium

fits  18-24 Softail

Black anodized finish. Used on bikes with tall suspension. Lowers the jiffy stand 1.5″ (3.8cm) to compensate for longer front forks and longer rear shocks. Bolt-on installation ease. Includes stainless hardware an a new rubber bumper. Note: The ride height of the bike must be at least 2″ (51mm) higher than stock to obtain a correct parking angle.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Chassis & Frames > Frame Accessories > Jiffy Stands, Side Stands & Center Stands > Bare Knuckle Performance, kickstand lowering/lift kit. Black

fits  18-24 Softail

A primary lock bar is key in locking the primary drive system on Harley-Davidson® motorcycles. JIMS® lock bars are made from aircraft quality steel and plated in black oxide for corrosion resistance. The length of the bar is designed for solid engagement in-between the engine compensating sprocket and clutch sprocket. Locking the primary drive is required for a wide range of service work including changing or removing the compensator nut, changing the primary chain, chain tension adjustment, changing the stator, removing the clutch hub nut and general clutch maintenance.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Primary > JIMS, primary lock bar

fits  17-24 FLT/Touring (excl. 23-24 CVO; 2024 FLHX, FLTRX)

Time saving transmission master rebuild kit comes with over 50 individual parts, providing you with a one in all no-hassle transmission rebuild solution and subsequent short motorcycle down-times. Kit comes complete with all required with JIMS proven performance components and a complete gaskets & seal kit for the M8’s 6-speed Cruise Drive transmission.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Drivetrain > Transmission > Gasket & Seal Kits > JIMS, M8 6-speed transmission rebuild kit

fits  18-24 Softail

1.5W, 1 LED. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Kellermann, ‘Dash A’ turn signal. Left front

fits  18-24 Softail

1.5W, 1 LED. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Parts > Lights > Turn Signals > Kellermann, ‘Dash A’ turn signal. Right front

fits  18-24 Softail

2.5W, 3 LEDs. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Kellermann, ‘Dash M’ turn signal. Left front

fits  18-24 Softail

2.5W, 3 LEDs. An inconspicuous install below the handlebar and approved for front use. Hard to spot once installed but street legal. In busy traffic it is important that turn signals are actually seen, this is where the Kellermann power LEDs shine… they are spectacularly bright so you will not be overlooked. Apart from the power LEDs a sophisticated system of lenses and reflectors, called EXtranz® (Extreme Optical Transparency technology), is used. Installation is bolt-on and all electronics of the Dash turn signals are inside the turn signal housing, for easy connecting to the 12 volt system. – Sensationally small, spectacularly bright – EXtranz® – Extreme Optical Transparency Technology – Kellermann HighPower LED Technology – Longlife Protection Guard®, IC operated, 330 kHz – Black quality metal housing with tinted lens – Suitable for 12 volt DC applications – European design protection – Approved for front use. Note: Electronic equipment may be required to regulate flash rate (see 996466 Kellermann i.Nex equalizer for an easy turn signal, tail/brake lights and position lights installation solution)

Δείτε περισσότερα στον κατάλογο

Home > Kellermann, ‘Dash M’ turn signal. Right front

fits  18-24 Softail

Euro 4 and Euro 5 homologated Kodlin 2 into system made by Zard. Exhaust flanges only are mounted to the heads. The headers are pushed into the exhaust flanges and are held in place with springs, same with the mufflers. Offers super easy and quick exhaust removal during engine or transmission maintenance. Like Zard’s own systems, this Kodlin special is made from AISI 304 stainless steel with visible MIG welds. Manufactured using high end 2D/3D lasers, robots, bending machines and skilled qualified welders for a perfect result. Comes with a plain stainless steel works finish and a powerful sound. – Compatible with stock to high performance motors – Clear stainless works finish – With a riveted ‘Kodlin powered by Zard’ plate – 3 lambda sensor connections (2 large for wideband sensors for tuning, incl. adapter for OEM sensors) Note: Fat Boy and Breakout models additionally require 994435 mounting bracket, which is optional available. Note: This is a EU homologated slip-on exhaust system. Removing or modifying the Db killer on homologated mufflers will void the warranty and the homologation. Certification is valid for unmodified stock bikes, for the specific models and model years as mentioned in the product descriptions (Directive 97/24/CE, EU regulation 134/2014). The approval number, shown on the supplied relevant certificate, is stamped on the muffler and it must be presented to law enforcement when checked.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Exhaust > Full Systems > 2 into 1 > Kodlin, Next Level 2-1 exhaust system. Clear stainless