fits  99-06 Twin Cam (excl. 2006 Dyna) (NU)

40% more feed than stock and 60% more scavenge. Fits as stock replacement. Assembles without O-rings on the pump housings, similar to the OEM and SE oil pumps. Billet 6061 aluminum. Increases oil pressure and scavenge (return) over stock. With 2 chromoly gerotor gears. • Billet 6061 aluminum • Increases oil pressure • 40% more pressure volume over stock • 60% more scavenge volume over stock • 2″ Chrome Moly gerotor gears • Stock replacement • Made in the U.S.A.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Oil Pumps > Feuling, OE+ oil pump

fits  99-06 Twin Cam (Excl. 2006 Dyna) (NU)

Stock replacement for Twin Cam. Fabricated from 7075 billet aluminum with military specs, a red hard anodized finish, blue printed and designed for performance. The 7075 alloy is 50% harder and stronger than 6061 aluminum and holds tighter tolerance under temperature which equals in 20% more feed and 30″ more scavenge. High flow 4140 heat treated chromoly gerotor gears. Note: Works with stock cam plate but Feuling high flow cam plate recommended for best performance, see 566079 for gear drive cams or 566080 for chain drive cams. • 7075 Billet aluminum with military spec hard anodized, blue printed and designed for the racer! • The 7075 alloy is 50% harder and stronger than 6061 aluminum and holds tighter tolerance under temperature • More pressure volume and more oil pressure • More scavenge volume eliminating power robbing wet sumping, blow – bye and oily air cleaners • Cooler oil and engine temperatures • More horsepower, more torque, more oil pressure, more return volume • High Flow 4140 heat treated Chrome Moly gerotor gears • Stock replacement for Twin Cam engines • When combined with the Feuling Camplate test results show 3 Horsepower gain and 4 ft/lbs of Torque gain to the rear wheel, while lowering engine & oil temperature. Feuling camplate NOT required. • Stock replacement for Twin Cam engines, recommended for both strip & performance street engines • Made in the U.S.A.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Oil Pumps > Feuling, Race Series Oil Pump

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Stock style replacement. OEM replacement reference 25683-06

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, camshaft roller chain. Inner 16 links

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

– Replacement outer chain tensioner only – For Feuling 948491 inner & outer cam chain tensioner kit.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Feuling, outer chain tensioner only

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

– Replacement inner chain tensioner only – For Feuling 948491 inner & outer cam chain tensioner kit.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Feuling, inner chain tensioner only

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

– Direct upgraded replacement for the stock inner (secondary) & outer (primary) hydraulic cam chain tensioners – Housings are precision machined from billet 6061 aluminum – Tensioner pads are injection molded nylon with PTFE added for less friction and better endurance for extended service intervals – Single piston, designed to duplicate the tension of the OEM parts – Includes ARP 12-point chrome moly installation hardware – These tensioners will fit Feuling, OEM and SE 07-17 Twin Cam cam plates and the conversion cam plates, designed to run the early 99-06 camshafts. – For replacement parts see: 948490 inner chain tensioner only, 948489 outer chain tensioner only, 948492 2-pk tensioner pads, 948493 6-pk tensioner pads.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Feuling, Twin Cam hydraulic chain tensioner set

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

All Black armor coat anodized finish. CNC machined forged 6061-T6 billet aluminum. Incl gasket & hardware.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Transmission > Top Cover Parts > Arlen Ness, 10-gauge transmission top cover all black

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Machined steel. Cam drive sprocket (installs on the cam), stock replacement roller chain drive sprocket for 07-17 Twin Cam engines. Installs on the cam. Feuling crank sprockets are designed with a tighter tolerance on the inside diameter for better fit to the pinion shaft. Note: Also used for 99-06 Twin Cam when converting from 99-06 to 06-17 style hydraulic cam chain tensioners.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Top End > Feuling, cam driven gear. 34T

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Connects both cams. Twin Cam uses a dual (inner & outer chain). This is the inner cam chain for Twin Cam models with the OEM style hydraulic chain tensioners. OEM replacement reference 25683-06. Note: See 921606 for the outer (primary) Twin Cam cam chain.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Inner cam chain, 06-17 Twin Cam

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Includes inner & outer hydraulic cam chain tensioners. OEM style replacement.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > MCS, inner & outer cam chain tensioner kit