fits  99-06 Twin Cam (excl. 2006 Dyna) (NU)

Chain drive. 594 CAMS – Fierce performing camshaft for an array of engines sizes, large displacement 103″, 110″ & 124″ engines looking for a superior torque band with excellent horsepower gains in heavy bikes (RPM 2,200 – 6,250.) Smaller high revving displacement 95″ style engines in lighter bikes looking to twist the throttle and tap into some horsepower (RPM 2,500 – 6,800). Large displacements respond well to increased compression ratio and smaller displacements will require it. 594 cams require high performance valve springs, pushrods, lifters, carburetor and or throttle body work, performance exhaust, intake and clutch. Note: 1999 model engines using key way camshafts/sprocket will need to purchase new spline style rear cam sprocket separately. Please see 503575 34T cam driven gear.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Feuling, Reaper chain driven 594C camshaft set

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Compatible with both gear or chain drive camshafts. A competitive priced upgrade to the stock oiling system. The Feuling OE+ billet oil pump and matched OE+ billet cam plate help increase oil pressure and return scavenge volumes. The OE+ billet cam plates have better rigidity and are machined to tighter tolerances than stock. The OE+ cam plate pressure relief valve and spring are seated and pre-set with a 50-60 psi pop off. OE+ oil pumps assemble without O-rings on the pump housings, similar to the OEM and SE oil pumps. Includes bearing retainer plate and hardware. Note: Gear drive cams require separate purchase of block-off plates see Feuling 566113.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, OE+ Oiling System. Gear or Chain drive

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Replacement for pump 566076. FEULING offers replacement oil pump housings, when damage occurs to either the gear set or aluminum housing the components must be replaced as a set because the inner & outer gears are matched to each other then matched to the aluminum housing within 0.0005″ requiring the items be replaced as a matched set.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Oil Pumps > Feuling, Hp+ Oil Pump Pressure Housing Set

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Replacement set for Feuling HP+ pump 566076. FEULING offers replacement oil pump housings, when damage occurs to either the gear set or aluminum housing the components must be replaced as a set because the inner & outer gears are matched to each other then matched to the aluminum housing within 0.0005″ requiring the items be replaced as a matched set.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Oil Pumps > Feuling, Hp+ Oil Pump Scavenge Housing Set

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Replacement for Fueling race pump 707384. FEULING offers replacement oil pump housings, when damage occurs to either the gear set or aluminum housing the components must be replaced as a set because the inner & outer gears are matched to each other then matched to the aluminum housing within 0.0005″ requiring the items be replaced as a matched set.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Oil Pumps > Feuling, Race Series Oil Pump Scavenge Housing Set

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Direct bolt-in replacement for the stock cam plates. OEM replacement reference 25355-06. Feuling’s OE+ plates are manufactured from 6061 aluminum providing increased rigidity and machined to high tolerance standards. For both stock chain and aftermarket gear drive for use with stock 07-17 style oil pumps, and Feuling oil pumps: 707380, 566076, 707384. Note: Gear drive cam systems require block off plates – see Feuling 566113. Feuling OE+ stock replacement billet cam plates are manufactured from 6061 aluminum providing increased rigidity and machined to Feuling’s high tolerance standards. The pressure relief valve and spring are pre-set, matched and seated by Feuling with a full pop off pressure of 50-60 psi. OE+ cam plates are a direct bolt in replacement and will accept the factory oil pump. As with all Feuling components, the competitively priced OE+ cam plates are designed and manufactured to the highest standard of quality with proven Feuling performance. • Tighter cam journal bore tolerance for improved cam fitment • Added Cam journal oil groove for cold start up protection and increased cam journal lubrication • Added oil pressure feed holes to front and back of cam journals to prevent excessive thrusting wear

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Cams > Cam Plates & Kits > Feuling, OE+ cam support plate. Gear or chain drive

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Set of 2. Replacement chain tensioner pads for use with Feuling 948491 chain tensioners set.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Feuling, replacement chain tensioner pads (2pk)

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Set of 6. Replacement chain tensioner pads for use with Feuling 948491 chain tensioners set.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Feuling, replacement chain tensioner pads (6pk)

fits  07-17 Softail; 06-17 Dyna; 07-16 FLT/Touring (NU)

Kit includes 565142 cam support plate and 565144 pump. Direct replacement for Twin Cam stock style oil pump and cam support plate. Compatible with chain & gear driven camshafts. Offers all round improvement over the stock components. Both are CNC machined forged aluminum for strength and precision. The camshaft support plate offers an adjustable oil pressure regulator, passage plugs are removable for service, a rebuildable bronze pinion shaft bushing and for 07-17 models rebuildable bronze cam bushings. The oil pump comes with three sets of gerotors for consistent pressure and increased oil scavenging for a reliable oil return. More forgiving for cam run-out. Offers screens and magnetic traps to catch debris before it does damage to the scavenge rotor.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Oil Pumps > TC3 oil pump & cam support plate kit for Twin Cam

fits  99-06 Twin Cam (Excl. 2006 Dyna) with S&S 565144 or OEM 06-17 style oil pump and 06-17 hydraulic chain tensioners (NU)

This camshaft support plate offers an adjustable oil pressure regulator, passage plugs are removable for service, a rebuildable bronze pinion shaft bushing. Compatible with chain & gear driven camshafts. Note: Not compatible with OEM 99-06 oil pump. Use 565144 S&S TC3 or OEM 06-17 oil pump. Note: 06-17 style hydraulic chain tensioners are required with chain driven cams.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Oil Pumps > S&S, TC3 cam support plate kit for Twin Cam