fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Used to rotate the engine from the sprocket shaft (with 24 splines), when doing engine building, timing, pushrod or other adjustment checks for which the engine must be rotated. The spline fit has intentionally been made with just a hair of extra play so the socket slides onto your sprocket shaft with ease, even if it’s an old shaft that has a couple burs or defects in it. Made from heat threaded 4140 steel. Cerakote finish.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Engine Lower End > Fast Eddy, engine rotation socket. 24-spline

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Used to rotate the crankshaft for timing or clearance checks. Fits the splines on the sprocket shaft. With a 1/2″ drive.

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > General Tools > Hand Tools > Sockets > MCS, sprocket shaft rotating socket tool

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Adapter only for use on fine-spline sprocket shafts Note: Use with 979426 sprocket shaft bearing installer tool

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Lower End > George’s Garage, sprocket shaft adapter kit

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Lower end Quick Change kit for chain drive cams. Includes: Quick change gasket kit, qty. 2 Timken inner cam bearings replaces HD #9215, crank and cam bolts, camshaft retaining ring, moly lube and Loctite. Complete as shown.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Fasteners > Feuling, camshaft installation kit. Chain Drive

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Lower end Quick Change kit + top end gasket kit, for gear drive cams. Includes: Quick change + Top end gasket kit, qty. 2 Timken inner cam bearings replaces HD #9215, crank and cam bolts, camshaft retaining ring, moly lube and Loctite. Complete as shown. Note: Specific seals for Twin Cooled heads are not included.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Fasteners > Feuling, camshaft installation kit + top end. Chain Drive

fits  99-06 Twin Cam (Excl. 2006 Dyna) (NU)

For chain drive cams. Includes the cam cover gasket, cam plate bearings, inner cam bearings, bolts, o-rings and retaining ring.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > S&S, chain drive camshaft installation support kit

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Allows 979411 cam installer tool to work on late model Twin Cams

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Lower End > George’s Garage, update bearing pilot only

fits  99-06 Twin Cam A/B (NU) (Excl. 2006 Dyna)

Used to remove the inner cam bearings

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Top End > George’s Garage, inner cam bearing remover tool

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Delrin; Holds both camshafts in an upright position while lowering the cam support

Δείτε περισσότερα στον κατάλογο Workshop

Home > Workshop > VTwin Tools > Engine Top End > George’s Garage, camshaft assembly tool

fits  06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)

Used to remove the inner cam bearings easily without any damage to the crankcase. This precision built tool will also keep the pin rollers from accidentally falling into the crankcases. Designed similar to the Evo cam bearing tool. Note: See 978215 for cam bearing installer tool.

Δείτε περισσότερα στον κατάλογο V-Twin; Workshop

Home > Workshop > VTwin Tools > Engine Lower End > JIMS, inner cam bearing remover tool