fits  Universal

Universal ON-OFF switch, complete with relay. Will switch anything that needs to be switched, like handlebar heaters, fog lights etc. Perfect solution for a prominently shown, or hidden, custom switch on just about any custom or stock bike. Complete with aluminum mount bracket and rear cover. Complete with pre-installed wiring. – Cable length approximately 1m long x 4.9mm OD – Mount hole is 6.5mm for 6mm or 1/4″ bolts – IP67 water/dust proof rating. Note: Late model H-D with CAN-bus wiring, like 11-up Softail; 12-17 Dyna; 14-up Touring; 14-22 XL Sportster, will additionally require OEM 72673-11 electrical Y-harness connection kit which plugs into the data port (OBD / On Board Diagnostics plug) to provide a 12 volt lead.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Switches > Riverside, handlebar ON-OFF switch kit

fits  96-22 H-D with dual throttle cables (Excl. Street) (NU)

Chrome. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Bakelite® retro handlebar grip set. Chrome

fits  96-22 H-D with dual throttle cables (Excl. Street) (NU)

Black anodized. Billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Bakelite® retro handlebar grip set. Black

fits  1″ handlebars equipped with a custom internal throttle system

Chrome. Designed for use with custom internal throttle grips. Both grips have an internal diameter of 1″. These grips are made from billet aluminum with a brown colored Bakelite® resin grip. Bakelite® is an early 20th century material that was used before modern, and much cheaper to produce, hard plastics were invented. True classic grips!

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Bakelite® retro handlebar grip set. Int. throttle

fits  L85-17 Big Twin (Excl. M8); 86-22 XL Sportster; 08-12 XR1200 (NU)

Chrome plated machined aluminum construction. Fits over the head bolts on Evolution B.T., Twin Cam and Sportster models. Each cover secures with the included Allen head (socket head) set screws. Complete with hex key for installation.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Top End > Rocker Covers > Riverside Custom, head bolt cover kit. Chrome aluminum

fits  L85-17 Big Twin (Excl. M8); 86-22 XL Sportster; 08-12 XR1200 (NU)

Black anodized machined aluminum construction. Fits over the head bolts on Evolution B.T., Twin Cam and Sportster models. Each cover secures with the included allen head (socket head) set screws. Complete with hex key for installation.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Top End > Rocker Covers > Riverside Custom, head bolt cover kit. Black aluminum

fits  Universal (excl. e-throttle models)

Heating units, 50W (approx. 4 Amp@12 Volt) for use inside handlebars. No special grips required, nothing to see on the outside. Fits bars with a inner diameter of 22mm and secures with a set-screw. The heating elements can be machined down, if required, to a minimum of 18mm. Note 1: Will not fit e-throttle models. Note 2: When you decide to glue the heating elements inside the handlebar, make sure a special heat resistant glue is used.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Heated Grips > Riverside, grip heaters

fits  80-24 H-D with rider floorboards

Mounts to OEM floorboards of all 80-up Harley models equipped with rider floorboards. Perfect to stretch your legs on long hauls, without having to stop. Note: Installation will require modifications to the floorboard.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Footpegs & Forward Control > Floorboards > Floorboard Extension Parts > Riverside, footrest kit for rider floorboards

fits  84-99 FXST; 80-86 FXWG; 91-92 Dyna; 18-24 Softail and custom applications with 5/16-24 threaded shift rods

Polished stainless steel shift linkage end / ball joint / heim joint. 5/16-24 threaded with a 5/16″ (8mm) mount hole. The finishing touch to a stylish shifter rod set-up. OEM replacement reference 33871-85B.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Transmission > Shifter Rods > Riverside, shifter rod end. Stainless

fits  74-22 H-D with single or dual throttle cables (Excl. Street) (NU)

Black anodized billet aluminum with chrome plated end caps.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Handlebars & Hand Controls > Grips > Riverside, Knurled billet aluminum grips. Black