fits  82-16 FLT/Touring (NU)

With grease fitting. OEM replacement reference 33709-82B.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Footpegs & Forward Control > Shifter Side > Shifter Levers > Shifter Levers Inner > Pingel, inner shifter shaft. Stainless steel

fits 

Used to plug vacuum fittings when no longer in use.

Δείτε περισσότερα στον κατάλογο V-Twin; Street

Home > Parts > Intake > Fuel Injection & Carburetors > Fuel Injection > Other > Pingel, vacuum line caps

fits  80-84 (NU) FL, FLH; 80-24 FLT/Touring; 09-24 Trikes

Some riders think the heel shifter is unnecessary. When the heel shifter lever is removed this cover is used to fill the void. It keeps the shifter shaft in perfect alignment to prevent premature wear.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Transmission > Pingel, heel shift lever eliminator. Chrome

fits  09-24 FLT/Touring

Black. Used to offset the rider floorboards outwards for a more comfortable seating position and to keep feet and clothing away from exhaust pipes, painted side covers, chrome primary cover and chrome derby cover

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Footpegs & Forward Control > Floorboards > Floorboard Extension Parts > Pingel, rider floorboard extenders. 1-1/4″ offset

fits  85-13 FLT/Touring models with radio (NU)

Mounts antenna low and points it in an angle backwards, so it will clear a Tour Pak. Mounts to rear fender support brackets. Fits models with OEM saddlebag fillers. Kit includes hardware and a polished stainless bracket.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Pingel, antenna low mount relocation kit – radio

fits  09-13 H-D FLT/Touring models with CB transmitters (NU)

Mounts antenna low and points it in an angle backwards, so it will clear a Tour Pak. Mounts to rear fender support brackets. Fits models with OEM saddlebag fillers. Kit includes hardware and a polished stainless bracket.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Pingel, antenna low mount relocation kit – CB

fits 

Even a very well built fuel valve may require some attention at some point. This is an original Pingel rebuild kit for 3 petcocks. Complete kit that includes tools, photos, instructions and enough rebuild components to service three Pingel fuel valves. Note: See 914447 for 5 rebuild kits, but without the required tool as supplied with this 914446 kit. Note: Intended for professional workshop use only. Note: Installation requires a bench vice that opens 6-1/2″ (16.5cm) or more.

Δείτε περισσότερα στον κατάλογο V-Twin; Street

Home > Parts > Gas Tanks & Accessories > Petcocks > Pingel, petcock rebuild kit

fits 

Even a very well built fuel valve may require some attention at some point. This is an original Pingel rebuild kit for 5 petcocks, with the rebuild components only. Note: Does not include the required tool as supplied in 914446 kit, used to service 3 petcocks. Note: Intended for professional workshop use only. Note: Installation requires a bench vice that opens 6-1/2″ (16.5cm) or more.

Δείτε περισσότερα στον κατάλογο V-Twin; Street

Home > Parts > Gas Tanks & Accessories > Petcocks > Pingel, petcock rebuild component kit

fits  02-24 FLT/Touring with OEM air adjustable shocks & OEM Premium right-hand adjustable shocks (excl. FLHX, FLHRC, FLHRS, Lows, Trikes)

Billet aluminum with a black anodized finish. Lowers rear side approx. 1″ but leaves adequate space between the rear tire and the fender. To be used with the stock shocks with stock rubber shock-boot. Installs in approx. 30 minutes. Includes hardware and installation instructions. Note: Bikes that are Factory lowered should not use this kit, or do so with minimal loads only.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Suspension > Shock Absorbers Rear > Lowering Kits & Lift Kits > Pingel, rear Dresser lowering kit. Black

fits  07-22 XL Sportster (NU)

1/4″ threaded. For Delphi fuel injection to carb conversion. Stainless billet. When converting your fuel injected bike to carburetor you can use these adapter kits to make the fuel fittings on your gas tank compatible with 22mm Pingel petcocks. Comes with adapter fitting for petcock and one plug. Note: Due to the close-contact thread design of these adapter plugs a stock replacement petcock may not fit. A Pingel petcock will fit.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Gas Tanks & Accessories > Gas Tanks > Pingel, gas tank EFI to carb adapter & plug kit