fits  18-25 Softail; 17-25 Touring; 17-25 Trikes

24-pack. Used to quiet your engine and reduce wear by reducing end play of rocker arm to cylinder head. Feuling recommends 0.0035″ to 0.0045″ for optimum rocker arm oil psi and noise reduction. M8 cylinder heads also have excessive wear on the rocker arm standoff trusting surfaces, when the hardened shim is placed on the thrusting side it will assist in reducing further wear and damage to cylinder head. Will benefit stock engines and highly recommended for engines with high lift camshafts or higher pressure valve springs. Note: Shims should be installed by a professional, one who can make correct end play measurements and can install and tighten rocker shaft nuts/bolts without damaging shims. USA made

Δείτε περισσότερα στον κατάλογο

Home > Feuling, Gorilla M8 rocker shaft shim set .003″

fits  84-25 Big Twin; 86-22 (NU) XL Sportster; 08-12 (NU) XR1200; 87-10 (NU) Buell XB

OEM style reproduction retaining rings. OEM replacement reference 65325-83A

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Exhaust Gaskets > Feuling, exhaust gasket retaining ring set

fits  18-25 Softail; 17-25 Touring; 17-25 Trikes

24-pack. Used to quiet your engine and reduce wear by reducing end play of rocker arm to cylinder head. Feuling recommends 0.0035″ to 0.0045″ for optimum rocker arm oil psi and noise reduction. M8 cylinder heads also have excessive wear on the rocker arm standoff trusting surfaces, when the hardened shim is placed on the thrusting side it will assist in reducing further wear and damage to cylinder head. Will benefit stock engines and highly recommended for engines with high lift camshafts or higher pressure valve springs. Note: Shims should be installed by a professional, one who can make correct end play measurements and can install and tighten rocker shaft nuts/bolts without damaging shims. USA made

Δείτε περισσότερα στον κατάλογο

Home > Feuling, Gorilla M8 rocker shaft shim set .005″

fits  H-D with Feuling vented dipstick

Replacement breather/line kit for all Feuling vented dipsticks. Includes breather line, filter element, female quick disconnect breather line fitting and zip ties. Note: Feuling in house testing shows venting the air cleaner to atmosphere may be problematic resulting in oil carry over/misting out of the breathers. When air filter venting is accompanied with the use of oil tank venting such as the Feuling vented dipstick and or a vented transmission top cover the oil carry over/misting can be increased.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Oil Tanks & Filters > Oil Tanks > Oil Filler Plugs & Dipsticks > Oil Dipsticks > Feuling, Replacement Line Kit

fits  18-25 Softail; 17-25 Touring; 17-25 Trikes

24-pack. Used to quiet your engine and reduce wear by reducing end play of rocker arm to cylinder head. Feuling recommends 0.0035″ to 0.0045″ for optimum rocker arm oil psi and noise reduction. M8 cylinder heads also have excessive wear on the rocker arm standoff trusting surfaces, when the hardened shim is placed on the thrusting side it will assist in reducing further wear and damage to cylinder head. Will benefit stock engines and highly recommended for engines with high lift camshafts or higher pressure valve springs. Note: Shims should be installed by a professional, one who can make correct end play measurements and can install and tighten rocker shaft nuts/bolts without damaging shims. USA made

Δείτε περισσότερα στον κατάλογο

Home > Feuling, Gorilla M8 rocker shaft shim set .010″

fits  18-25 Softail; 17-25 Touring; 17-25 Trikes

18-pack. Shim kit includes 6 of each .010″, .005″ and .003″ thickness. Used to quiet your engine and reduce wear by reducing end play of rocker arm to cylinder head. Feuling recommends 0.0035″ to 0.0045″ for optimum rocker arm oil psi and noise reduction. M8 cylinder heads also have excessive wear on the rocker arm standoff trusting surfaces, when the hardened shim is placed on the thrusting side it will assist in reducing further wear and damage to cylinder head. Will benefit stock engines and highly recommended for engines with high lift camshafts or higher pressure valve springs. Note: Shims should be installed by a professional, one who can make correct end play measurements and can install and tighten rocker shaft nuts/bolts without damaging shims. USA made.

Δείτε περισσότερα στον κατάλογο

Home > Feuling, Gorilla M8 rocker shaft shim kit

fits  00-17 Twin Cam B (Softail); 17-25 M8

STD size. Crankshaft bearing race kit for M8 and TCB (Softail) model engines. Kit includes right and left side crankshaft races with the left side thrust washers. These Feuling press on races have a precision ground outer diameter finish and are designed to be true to size producing the correct OD after proper press on installation. OEM replacement reference none.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Flywheels > Feuling, crankshaft bearing race kit. STD

fits  00-17 Twin Cam B (Softail); 17-25 M8

Undersized. Crankshaft bearing race kit for M8 and TCB (Twin Cam Softail) model engines. Pinion race is undersized to allow service and re machining of pinion shaft when prior damage occurred such as race spinning on shaft. Kit includes right and left side crankshaft races with the left side thrust washers. These Feuling press on races have a precision ground outer diameter finish and are designed to be true to size producing the correct OD after proper press on installation. OEM replacement reference none.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Lower End > Flywheels > Feuling, crankshaft bearing race kit. Undersized

fits  Universal

Used to build into a custom made exhaust system. Will increase torque by preventing exhaust waves entering the combustion chamber for a more positive cylinder fill. Stainless FEULING AR (Anti-Reversion) Chamber, Inlet 1.750″, exit 1.875″, 3.250″ OAL Over All Length. Brushed finish. Includes Feuling AR badge. For use with a custom made exhaust, chambers must be fabricated into a system. Sold Each. AR Chambers. (Patent # US 4206600 A & 6336471 B1): Our patented Anti-Reversion technology transferred from our performance automotive development dating back to the 70’s. Designed to increase power, throttle response and fuel economy as well as reduce carbon deposits and cylinder temperatures. This is achieved by the overlapping bulb chamber inside that traps negative exhaust waves carrying heat and spent gases. By blocking these waves we also reduce exhaust gas from re-entering the combustion chamber, allowing for a more positive intake charge and crisper throttle response. This will also allow for a leaner tune increasing fuel economy. Note: Special Order Product only. To order please contact your MCS sales representative.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Exhaust > Headpipes > 2 into 1 > Feuling, AR (Anti-Reversion) chamber

fits  02-17 V-Rod (NU)

High quality Viton valve seals designed to handle high engine temperatures with a built in spring loaded wiper to clean excess oil from valve stem with minimal friction. Includes 8 seals. OEM replacement reference 18687-01K.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Engine > Top End > Valves > Guide Seals > Feuling, V-Rod Viton valve seals set