fits  06-17 (NU) Dyna; 07-23 Softail; 07-23 FLT/Touring; 09-23 Trikes

Steel. For OEM 30-46 drive ratio. Over tension is an issue with the OEM primary chain tensioner. Unnecessary stresses on chain, sprockets and bearings can cause premature failure. This steel ‘Bump Stop’ blocks the OEM automatic chain ratcheting system, thus preventing it from ratcheting too far. Adjustments are made by grinding material away from the bump stop’s grooved wear marks. Primary chain adjustments can be made together with every 5000 mile primary oil change. Incl. Installation instructions. Permanent modifications are not required.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Primary > Primary Chain Tensioners & Parts > Evolution Industries, chain tensioner bump stop

fits  18-24 Softail (excl. 19-20 FXDRS); 17-24 FLT/Touring

The stock compensator sprocket assembly includes a damper system which can induce slippage, noise and weighs 2.16kg (4.77 lbs.). This Evolution Industries motor sprocket is a rigid mounted sprocket to prevent any issues related to the stock sprocket and does so at less than half the weight. Manufactured from black oxide coated high strength 4140 tool steel. Custom replacement for OEM 40100076, 40100076A compensator & motor sprocket assembly.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Primary > Motor Sprockets & Parts > Evo Industries, 34T solid motor sprocket kit

fits  L84-06 Big Twin (Excl. 2006 Dyna) with EV Industries Power Drive solid motor sprockets (NU)

Required for installation of all Evolution Industries Power Drive solid motor sprockets 552043/552044/552045/552048/552047/552046

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Drivetrain > Transmission > Transmission Housing Parts > Sprockets > EV Industries, motor sprocket nut

fits  94-06 Big Twin (Excl. 2006 Dyna) (NU)

With 10T pinion gear for 102T OEM style starter ring gear. Direct OEM style replacement. This jackshaft assembly includes all necessary items like jackshaft bolt, spring, pinion gear, thrust washer, lock plate, coupling, output shaft coupling, shaft and retaining ring.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Jackshaft Assemblies > Evolution Industries, starter motor jackshaft assembly

fits  94-06 Big Twin (Excl. 2006 Dyna). With Evolution Industries 84T ‘EasyStart’ starter ring gear (NU)

Conversion kit. With 10T pinion gear for 84T Evolution Industries ‘EasyStart’ starter ring gear conversion kit only. This jackshaft assembly includes all necessary items like jackshaft bolt, spring, pinion gear, thrust washer, lock plate, coupling, output shaft coupling, shaft and retaining ring.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Jackshaft Assemblies > Evolution Industries, ‘EasyStart’ jackshaft assembly

fits  90-93 Big Twin (NU)

Easy start, +15% torque, 9t pinion gear, converts from 66t to 84t

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Jackshaft Assemblies > Starter ring gear & jackshaft kit, 84t

fits  90-93 Big Twin (NU)

9 tooth for use with 66 tooth starter ring gears only. Heat treated aircraft quality steel with a black oxide finish.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Pinion Gears > Evolution Industries, starter pinion gear. 9 tooth

fits  90-93 Big Twin with Evolution Industries ‘EasyStart’ 84T starter ring gear only (NU)

9 tooth. Compatible with Evolution Industries 84 tooth ‘Easystart’ starter ring gears & conversion kits only. Heat treated aircraft quality steel with a black oxide finish.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Pinion Gears > Evolution Industries, starter pinion gear. 9T ‘EasyStart’

fits  94-06 Big Twin (Excl. 2006 Dyna). With Evolution Industries ‘EasyStart’ 84T starter ring gear only (NU)

10 tooth. Compatible with Evolution Industries 84 tooth ‘Easystart’ starter ring gears & conversion kits only. Heat treated aircraft quality steel with a black oxide finish.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Pinion Gears > Evolution Industries, starter pinion gear. 10T ‘EasyStart’

fits  94-06 Big Twin (Excl. 2006 Dyna) (NU)

10 tooth for use with 102 tooth starter ring gears only. Heat treated aircraft quality steel with a black oxide finish.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Electrical > Starter Motors > Pinion Gears > Evolution Industries, starter pinion gear. 10 tooth