fits  18-25 Softail; 17-25 FLT/Touring (excl. 23-25 VVT); 17-25 Trike

Requires high-lift springs. The cam for large 117/124/143″ etc. engines. More torque and power throughout RPM range. The dyno run of a modified 143″ engine showed 173 ft. lbs torque @ 3700 RPM and 155 HP @ 5600 RPM (1600-5600 RPM). Note: Bearings, o-rings and hardware are not included.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Andrews, M8 camshaft .554″ valve lift

fits  18-24 Softail; 17-24 FLT/Touring (excl. 23-24 VVT); 17-24 Trike

Bolt-in. For 107″ to 124″ engines. .464″ intake and .460″ exhaust valve lift. Agressive cam for middle to heavy weight bikes. Low & midrange power. (1200-5600+ RPM). Note: Bearings, o-rings and hardware are not included.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Andrews, 465B M8 camshaft .464″/.460″ valve lift

fits  18-24 Softail; 17-24 FLT/Touring (excl. 23-24 VVT); 17-24 Trike

Bolt-in. For 107″-132″ engines. Highest lift available for stock valve springs. Low & midrange power (1500-5600+ RPM). Note: Bearings, o-rings and hardware are not included.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Andrews, M8 camshaft .485″ valve lift

fits  99-06 Twin Cam (Excl. 2006 Dyna) (NU)

.555″ valve lift. Set includes two chain driven camshafts. A cam drive installation kit, that includes a gear cover gasket, cam bearings and retaining ring can be ordered separately as S&S 503593. Cams can be run with stock hydraulic lifters. For 95 to 103 inch engines. Up to 10:1 CR. Use high-lift springs. 2200-5600 RPM. Note: Owners of 1999 Twin Cams must separately purchase the splined 00-06 style driven gear (503575 Andrews). 00-06 models can re-use stock 34 tooth driven gear. Note: When using 99-06 chain drive cams for higher lift applications it is recommended to upgrade to gear drive or to convert to the 06-up hydraulic chain tensioners.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Lower End > Cams > Andrews, chain drive cam shaft set TW54/.555″

fits  18-24 Softail; 17-24 FLT/Touring

Power pulley. 3% more rpm for models with standard 32T pulley. Improves low speed strength, ideal for hauling sidecars and heavily loaded dressers.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Final Transmission > Pulleys > Pulleys Transmission > Andrews, M8 transmission pulley 31T

fits  18-24 Softail; 17-24 FLT/Touring

Overdrive pulley. 6% less rpm for models with standard 32T pulley. Used to reduce RPM at highway speeds, especially for lighter/stronger bikes. Not recommended for hauling side cars or on heavily loaded Dressers.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Final Transmission > Pulleys > Pulleys Transmission > Andrews, M8 transmission pulley 34T

fits  18-24 Softail; 17-24 FLT/Touring (excl. 2024 FLTRXSTSE RCVO Road Glide ST)

Standard replacement drive ratio. OEM replacement reference 35000152, 35000152A.

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Final Transmission > Pulleys > Pulleys Transmission > Andrews, M8 transmission pulley 32T

fits  14-19 Indians (excl. Scouts)

Bolt-in. Higher valve lift and more duration means power from 2000–6000 RPM, stock or modified engines Note: The compression release, compression release spring, compression release pivot pin, and the compression release pin set screw must be re-used from the old cams and installed in the Andrews camshafts which requires grinding the backside of the pin.

Δείτε περισσότερα στον κατάλογο Indian; Street

Home > Parts > Engine > Lower End > Cams > Andrews TS 550 Indian Chief cam

fits  14-19 Indians (excl. Scouts)

Requires high-lift valve springs. More lift and duration yields extra HP and torque in the 2200–6500 RPM range Note: The compression release, compression release spring, compression release pivot pin, and the compression release pin set screw must be re-used from the old cams and installed in the Andrews camshafts which requires grinding the backside of the pin.

Δείτε περισσότερα στον κατάλογο Indian; Street

Home > Parts > Engine > Lower End > Cams > Andrews TS 570 Indian Chief cam

fits  18-25 Softail; 17-25 FLT/Touring; 17-25 Trike

EZ-install pushrods can be installed without removing the rocker covers of fuel tanks, a big plus when switching to a bolt-in cam or just when servicing cam chest components. Especially for heavy duty service, like racing and/or high lift cams with high pressure springs it is advised to upgrade to chromoly pushrods. OEM replacement reference 17900030 (intake) , 17900031 (exhaust)

Δείτε περισσότερα στον κατάλογο V-Twin

Home > Parts > Engine > Top End > Pushrods > Andrews, M8 EZ-install adjustable chromoly pushrod set