fits  17-24 M8

Used to plug the crankcases professionally when the tappet covers are removed. Complete with nylon screws for installation. These do a perfect job of keeping dust and debris out of the engine. And stuffing the crankcase with paper or rags? Those days are over!

Δείτε περισσότερα στον κατάλογο

Home > 9Finger Fabrication, M8 lifter bore case cover set

fits  99-17 Twin Cam (NU)

Used to plug the crankcases professionally when the tappet covers are removed. Complete with nylon screws for installation. These do a perfect job of keeping dust and debris out of the engine. And stuffing the crankcase with paper or rags? Those days are over!

Δείτε περισσότερα στον κατάλογο

Home > 9Finger Fabrication, Twin Cam lifter bore case cover set

fits  66-84 Shovel; 84-99 Evo Big Twin (NU)

Used to plug the crankcases professionally when the lifter blocks are removed. Complete with nylon screws for installation. These do a perfect job of keeping dust and debris out of the engine. And stuffing the crankcase with paper or rags? Those days are over!

Δείτε περισσότερα στον κατάλογο

Home > 9Finger Fabrication, Evo/Shovel lifter bore case cover set

fits  All H-D with 530 rear chain drive

For rear 530 chain driven bikes. Used to lock the main drive gear and sprocket and allows proper torquing and removal of the sprocket nut, without using the uncontrollable force of an impact wrench.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Primary > 9Finger Fabrication, Chain Drive Sprocket Locking Tool

fits  18-24 Softail with mid controls

Fully adjustable for brake pedal height. Direct replacement for the stock non-adjustable brake linkage. Allows adjustments of the brake pedal from 3-1/2″ lower to 1-1/2″ higher to compensate for seating height, rider length and preference. Provides quicker and more comfortable brake actions. Stainless steel, complete with heavy duty heim joints.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Brakes > Brake Lines & Cables > Brake Cables > 9Finger Fabrication, M8 mid-control brake linkage. Black

fits  18-24 Softail with mid controls

Fully adjustable for brake pedal height. Direct replacement for the stock non-adjustable brake linkage. Allows adjustments of the brake pedal from 3-1/2″ lower to 1-1/2″ higher to compensate for seating height, rider length and preference. Provides quicker and more comfortable brake actions. Stainless steel, complete with heavy duty heim joints.

Δείτε περισσότερα στον κατάλογο

Home > Parts > Brakes > Brake Lines & Cables > Brake Cables > 9Finger Fabrication, M8 mid-control brake linkage. Polished

fits  66-24 Big Twin

Used to simplify getting your engine sprocket, clutch basket and primary chain all in perfect alignment when changing or checking any drivetrain components. Multiple standoff lengths allow use on all models from early Shovel to M8.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Primary > 9Finger Fabrication, primary chain alignment tool

fits  All H-D with screw-on oil filters

Keep the crap out of your engine while oil filter is removed. O-ring sealed with transfer ports that allow oil flow if engine is turned over with cover installed.

Δείτε περισσότερα στον κατάλογο

Home > Workshop > VTwin Tools > Maintenance > 9Finger Fabrication, oil filter cover

fits  01-17 Softail; 06-17 Dyna; 04-16 FLT/Touring; 06-22 XL Sportster; 08-12 XR1200 (NU)

Used to plug the crank position sensor hole in the crankcase to prevent dirt or debris entering the engine case. The captured 1/4-20 nylon bolt makes sure the plug and bolt will not be separated. Note: This is not a flywheel locking tool.

Δείτε περισσότερα στον κατάλογο

Home > 9Finger Fabrication, CKP sensor hole plug

fits  18-24 Softail; 17-24 FLT/Touring (excl. 2024 FLHX Street Glide 117; 2024 FLTRX Road Glide 117; 23-24 FLHXSE CVO Street Glide 121″ VVT; 23-24 FLTRXSE CVO Road Glide 121″ VVT; 2024 FLTRXSTSE CVO Road Glide ST 121″ HO); 17-24 Trikes

When the air cleaner is not installed, this cover is used to professionally cover the intake of the throttle body to prevent dust & debris entering the engine. Stuffing paper or rags down the intake? Those days are over!

Δείτε περισσότερα στον κατάλογο

Home > Parts > Intake > 9Finger Fabrication, M8 throttle body intake cover