Andrews Andrews, gear drive cam shaft set 64G/.640″

Description

AndrewsAndrews, gear drive cam shaft set 64G/.640″  503418

fits  99-06 Twin Cam (Excl. 2006 Dyna) (NU)

.640″ valve lift. Without inner & outer gears. These are available from S&S as 503606. An S&S (503566) or Andrews (503660) camshaft installation kit provides all parts for installation as bearings, gasket etc. High lift cam for modified 95-116+ inch engines with 10.2 or higher CR. Heads must be set for .700″ lift and modified for maximum flow. Use high-lift springs. 3000-6500+ RPM. Note: The inner drive gears are not installed on Andrews camshafts and must be ordered separately. Installation will require specialty tools. Note: An outer drive gear set is also required for installing these cams and must be ordered separately.

 

Δείτε περισσότερα στον κατάλογο V-Twin

 

 

 

 

 

 

Home > Parts > Engine > Lower End > Cams > Andrews, gear drive cam shaft set 64G/.640″